Roland HP507 用户手册

Is the HP507 in Dual play?

When the HP507 is connected to an external sequencer, set the Local Control to “Off.” Alternatively, the sequencer could be set so 

its Soft Thru feature is Off.

Tone buttons [E. Piano] [Strings] [Other] also operate as buttons that select “Recommended Tones.”
Connecting a commercially-available CD-ROM drive to the USB flash drive connector and selecting a song from a CD-ROM 

produced for the VIMA (VIMA TUNES) will automatically cause sounds appropriate for that song to be assigned to the [E. Piano], 

[Strings], and [Other] Tone buttons, so that you can select “recommended” sounds by pressing one of these buttons.

When you are using Dual play or Split play, and different effects are specified for the two selected tones, the effect will not be 

applied to Tone 2 (when using Dual play) or the left-hand tone (when using Split play).

–

The HP507’s piano sound faithfully simulates the depth and resonance of an acoustic piano, and this may give the impression of 

reverberation even if you’ve defeated the Ambience effect.
Also, you may be able to eliminate some reverberation by reducing the value set for “Cabinet Resonance.”

On an acoustic piano, the approximately one and a half octaves of notes at the top of the keyboard will continue sounding 

regardless of the damper pedal. These notes also have a somewhat different tonal character. HP507 faithfully simulate this 

characteristic of acoustic pianos. On the HP507, the range that is unaffected by the damper pedal will change according to the 

key transpose setting.

–

Is the speaker cable connected correctly?

If you hear this in headphones:
Piano sounds that have a brilliant and crisp character contain substantial high-frequency components that may sound as though 

a metallic ringing has been added. This is because the character of an actual piano is being faithfully reproduced, and is not a 

malfunction.
This sound can be adjusted by modifying the following settings.
•  String Resonance (p. 42)

•  Ambience (p. 22)

•  Duplex Scale (p. 42)
If you don’t hear this in headphones:
It is likely that there is some other reason (such as resonances within the unit). Please contact your dealer or a nearby Roland 

service center.

–

If you set the volume to the maximum setting, the sound may be distorted depending on how you perform.
If this occurs, turn down the volume. 

–

If you don’t hear this in headphones:
Performing at high volumes may cause the speakers or objects near the HP507 to resonate. Fluorescent lights or glass doors 

may also resonate sympathetically. In particular, this is more likely to occur for lower notes and higher volumes. You can take the 

following measures to minimize resonances.
•  Locate the speakers 10–15 cm (4–6 inch) away from walls or other surfaces.

•  Keep the volume down.

•  Move away from the objects that are resonating.
If you hear this in headphones:
It is likely that there is some other reason. Please contact your dealer or a nearby Roland service center.

–

Could a part be muted?
If the button indicator is out, the music on that part is not heard. Press the part button so the indicator is illuminated.

Could the part mute volume be set to other than “0”?
If you set this to “0,” the sound of a muted part will be completely inaudible.

Could the Song Balance Value be lowered?

Could the Audio files of the format be played?
Audio files of the following format can be played back.
•  File extension “.WAV”

•  16-bit linear

•  “44.1 kHz” sampling rate

Is the filename extension “MID”?
Files with other filename extensions cannot be handled as song data.

–

When playing a song from USB flash drive, the tempo may become unstable if there is an excessive amount of performance data.

–

The song name will not be shown if the song information in the file is empty or consists only of spaces.

–

Is the filename extension “MID”?
Files with other filename extensions cannot be handled as song data.

–

Has one of the part buttons for recording been selected?

Is a USB flash drive connected to the USB memory port?

–

Thanks to its multiple number of speakers, each of which can be used to play a different portion of the overall sound, the HP507 

is capable of producing piano sounds that possess great depth and seem to have three-dimensional presence.
Such effects are produced when you play something on the keyboard, or when you play back a song that's been recorded as an 

SMF. However, when you make an audio recording, the song will consist of two channels (stereo), and such effects cannot be 

reproduced.

–

Your recorded performance will disappear if you switch off the HP507’s power or select a song.
There is no way to recover the lost performance. Before you turn off the power, save your recorded performance in Favorite 

(internal memory) or USB flash drive.

–