Roland HP103 用户手册

下载
页码 56
 
31
Chapter 4. Recording Your Performance
 
Recording a New Song
 
Record only the keyboard performance without playing along with an internal song.
 
fig.panel4-1
 
Recording settings (select “USr”)
 
1
 
Press the [Song/Tempo] button, getting its indicator to light in red.
 
The song number appears in the display for several seconds.
 
2
 
Press [-] and [+] buttons simultaneously, and “USr” appears in the 
display.
 
Specifying the tone and tempo for recording
 
3
 
 
4
 
If necessary, turn on the metronome. 
 
 
5
 
Press the [Rec] button.
 
The [Rec] button’s indicator will light, the [Play] button’s indicator will blink, and 
you will be in recording-standby mode. 
 
Start recording
 
6
 
Recording will start when you either press the [Play] button or play the 
keyboard. 
 
Two measures of the count sound are played, and the recording begins.
Note that recording will also begin as soon as you play anything on the keyboard, 
even if you do not press the [Play] button. There is no count sound played when you 
start in this manner.
When recording begins, the [Play] button and [Rec] button indicators will light. 
Go ahead and perform on the keyboard.
 
Stop recording
 
7
 
Press the [Play] or [Rec] button. 
 
Recording will stop, and the indicators for the [Play] and [Rec] buttons will go dark. 
 
Play back the recorded performance
 
8
 
Press the [Play] button.
 
You will hear the recorded performance.
Once again press the [Play] button, and playback will stop.
2
6,7,8 5,7
1
3
4
NOTE
If you layer a newly recorded 
performance without erasing 
the recorded song, the song 
tempo and beat will be stored 
with the settings that were 
recorded first. 
When recording songs that 
start on an upbeat (that start 
on a beat other than the first 
beat of the measure), press the 
[Rec] button to put the HP103 
into recording standby, then 
press the [Play] button. Two 
measures of count sound are 
played, and then recording 
begins.
About the “USr” display
When you stop recording, the 
” display will change 
to “
.” 
The “.” in the lower right of the 
display indicates that there is 
already a recorded 
performance.
If you record without 
specifying the recording track, 
the performance will be 
recorded to the [Left] button. 
If you want to record the right 
and left hands separately on 
separate recording tracks, refer 
HP103_e.book 31 ページ 2005年3月24日 木曜日 午後4時58分