Roland HPi-6s 用户手册
106
Connecting to Other Devices
You can connect audio devices to play the sound of the HPi-6S
through the speakers of your audio system, or to record your
performance on a tape recorder or other recording device.
through the speakers of your audio system, or to record your
performance on a tape recorder or other recording device.
Use phone plug audio cables (sold separately) to make connections.
■
Connecting Speakers to the HPi-6S and
Outputting Sounds
Outputting Sounds
1.
Turn the volume all the way down on the HPi-6S and on
the speaker you’re about to connect.
the speaker you’re about to connect.
2.
Turn off the power to the HPi-6S and the speaker.
3.
Use audio cables (sold separately) to make the connection.
4.
Switch on the HPi-6S.
5.
Switch on the connected speaker.
6.
Adjust the volume level on the HPi-6S and the connected
speaker.
speaker.
When you play the HPi-6S’s keyboard, the sound is played from
the connected speakers.
the connected speakers.
Turning Off the Power
1.
Turn the volume all the way down on the HPi-6S and on
the speaker you’re about to connect.
the speaker you’re about to connect.
2.
Turn off the connected speaker.
3.
Turn off the HPi-6S.
■
Playing Sounds from Audio Equipment
Through the HPi-6S
Through the HPi-6S
1.
Turn the volume all the way down on the HPi-6S and on
the audio device you’re about to connect.
the audio device you’re about to connect.
2.
Turn off the power to the HPi-6S and the audio device.
3.
Use audio cables (sold separately) to make the connection.
4.
Switch on the audio device.
5.
Switch on the HPi-6S.
6.
Adjust the volume level on the HPi-6S and the audio
device.
device.
The sounds from the connected audio device are played by the
HPi-6S.
HPi-6S.
Turning Off the Power
1.
Turn the volume all the way down on the HPi-6S and on
the audio device you’re about to connect.
the audio device you’re about to connect.
2.
Turn off the HPi-6S.
3.
Turn off the audio device.
Connecting to Audio Equipment
* When connection cables with resistors are used, the volume
level of equipment connected to the input jacks may be low. If
this happens, use connection cables that do not contain
resistors.
this happens, use connection cables that do not contain
resistors.
* To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
on all devices before making any connections.
Input (Line In) jacks
Speaker etc.
Output (Line Out) jacks
Audio Set etc.
RCA pin-type Input jacks are
located to the lower right of the
front.
They provide a convenient way to
connect portable audio devices.
located to the lower right of the
front.
They provide a convenient way to
connect portable audio devices.
HPi-6S-e.book 106 ページ ２００７年１１月１９日 月曜日 午前１０時３６分