Roland HPi-6 用户手册

 

If you think there’s a problem, read this first.

 

Is the power cord connected and plugged in 
correctly? (p. 17)

 

Is Panel Lock activated? (p. 88) 
Turn the power off, then back on.

 

The HPi-6 uses a liquid-crystal screen, so text 
may not be displayed when the ambient 
temperature is below freezing.

Is the music rest (screen) connection cable 
connected correctly? (p. 17)

Is Panel Lock activated?
While Panel Lock is on, the screen display and 
the indicators for all buttons are turned off.

 

These occur due to the nature of a liquid 
crystal display, and do not indicate a 
malfunction. They can be minimized by 
adjusting the brightness of the screen (p. 18).

 

Is the pedal connected correctly? 
Make sure the pedal cord extending from the 
stand is securely connected to the pedal jack on 
the bottom of the unit (p. 17).

Has a different function been assigned to the 
pedal? 
See “Changing the Pedal Functions (Pedal)” 
(p. 82). 

Normal pedal operation is automatically 
enabled when the One Touch [Piano] button is 
pressed (p. 44).

Is the HPi-6 set to Twin Piano?
The pedal functions are changed automatically 
when the Twin Piano function is on (p. 32).

 

Adjust the adjuster underneath the pedal so 
that the pedal presses firmly against the floor 
surface (p. 27).

 

Could you be using a connection cable that 
contains a resistor? 
Use a connection cable that does not contain a 
resistor.

 

Are you using (optional) Roland memory?
Reliable performance cannot be guaranteed if 
you use non-Roland memory products.

 

Do you have different external devices 
plugged into different power outlets?
When connecting external devices, always 
draw power from the same outlet.

 

The HPi-6 can be set so that the demo begins 
playing automatically after the instrument has 
remained idle for five to ten minutes.
Switch this setting (Auto Start) to “Off.”
Refer to “Setting the Demo (Auto Demo)” (p. 
88).

 

Press the [

] button several times to return to 

the notation screen (p. 24), and then select a 
tone.

 

Is the volume level of the HPi-6 (p. 18) or 
connected device turned all the way down?

Are headphones plugged in?
Has a plug remained connected to the Phones 
jack? (p. 19)
When headphones or plugs are connected, the 
keyboard’s speaker stops playing.

Could the “Balance” setting be set all the way 
toward “Accomp” or “Keyboard”? (p. 55)

 

Is V-LINK switched on? (p. 88)
When V-LINK is switched on, the twelve keys 
at the left end of the keyboard are used to 
control images, and no sounds are played with 
these keys.

 

Are the MIDI cables connected correctly? 
(p. 97)

Does the MIDI channel match the connected 
instrument? (p. 98)

 

Has Local Control been set to “Off”?
When Local Control is set to Off, no sound is 
produced by playing the keyboard, Set Local 
Control to On (p. 98).

 

The maximum number of notes that the HPi-6 
can play simultaneously is 128. Frequent use of 
the damper pedal when playing along with a 
song may result in performance data with too 
many notes, causing some notes to drop out.

 

When the HPi-6 is connected to an external 
sequencer, set the Local Control to off (p. 98). 
Alternatively, the sequencer could be set so its 
Soft Thru feature is Off.

 

Are the settings for the “Temperament” (p. 82) 
and “Stretch Tuning” (p. 81) correct?

Is the setting for the “Master Tuning” correct? 
(p. 81)

HPi-6-e.book 101 ページ ２００５年１１月１５日　火曜日　午後３時４９分