Roland JUPITER-80 用户手册

If an incorrect operation is performed, or if processing could not be performed as you specified, an error message will appear.
Refer to the explanation for the error message that appears, and take the appropriate action.

Layer 1, to which the SuperNATURAL Acoustic Tone 0028: TW Organ is 

assigned, cannot be copied to another layer.

Change the layer 1 Tone to something other than the SuperNATURAL 

Acoustic Tone 0028: TW Organ (p. 57).

The allowable number of folders has been exceeded.

Delete unneeded folders (p. 75).

It is not possible to create more than 8 levels of folders.

Create the folder at a level higher than the 8th level (p. 75).

You attempted to delete a folder that was not empty.

Empty the folder before deleting it (p. 75).

The allowable number of files has been exceeded.

Move the file to a different folder, or delete unneeded files before 

moving the file (p. 75, p. 76).

The folder cannot be moved.

A folder cannot be moved into a folder within itself (i.e., its own 

sub-folder) (p. 76).

You attempted to move a folder to a level deeper than the 8th level.

Move it to a folder that is higher than the 8th level (p. 76).

When saving Live Sets or SuperNATURAL Synth Tones at the same time 

that you save a Registration or Live Set (p. 56, p. 65), the same write 

destination was selected.

Select a different write destination for the edited Live Set and 

SuperNATURAL Synth Tone (p. 54, p. 63).

Only SMF data in SMF Format 0 can be imported.

Make sure that the SMF you’re importing is in Format 0 (p. 45).

When executing recording, Create Folder, or Rename operations, you 

specified a name that was identical to an existing file. When executing 

the Move operation, an identically named file existed at the move 

destination.

Specify a different file name (p. 75).

No file is selected.

Select a file (p. 72).

This is a file that the JUPITER-80 is unable to play.

Select a file that is supported by the JUPITER-80 (p. 73).

The format of an SMF you intend to import to an arpeggio style must 

be Format 0.

Make sure that the SMF you’re importing is in Format 0 (p. 45).

The file name is invalid.

In the Create Folder or Rename operations, the name must not begin 

with a “.” (period), and must not contain a character prohibited for file 

names (\ / , ; * ? “ < > |) (p. 75).

An unusually large amount of MIDI data was received, and could not 

be processed.

Reduce the amount of MIDI messages that are being transmitted.

The MIDI IN connection was broken.

Check that there is no problem with the MIDI cable connected to the 

JUPITER-80’s MIDI IN, and that the MIDI cable was not disconnected.

The operation could not be performed because the read-only attribute 

is set for the folder or file.

Use your computer to clear the read-only attribute of the file or folder.

The JUPITER-80 was unable to start up.
The program could not be read correctly. Alternatively, the system 

update program may be invalid.

Use the correct program to perform the update once again.
If this does not solve the problem, contact your dealer or customer 

support.

Data could not be read from the USB flash drive.

Make sure that USB flash drive is correctly connected (p. 6, p. 17).
Also make sure that you’re using a USB flash drive sold by Roland.

The file is damaged.

Do not use this file.

The Registration buttons are locked.

Clear the Regist Button Lock setting (p. 81).

Rotary or VK-Rotary are not selected as the Live Set’s MFX Type.

Select Rotary or VK-Rotary as the MFX Type (p. 58).

You attempted to access the Synth Tone Edit screen of a layer for which 

a SuperNATURAL Synth Tone is not selected.

First assign a SuperNATURAL Synth Tone as the layer’s sound (p. 57).

The contents of system memory may be damaged.

Execute the factory reset operation (p. 87).
If this does not solve the problem, contact your dealer or customer 

support.

There was too much data in the SMF you attempted to import into an 

arpeggio style.

Reduce the amount of data in the SMF. For details on the amount of 

data that can be imported, refer to “Creating an Arpeggio Style from a 

There is insufficient space on the USB flash drive.

Delete unneeded data (p. 75).

The USB flash drive is not inserted, or is inserted incompletely.

Turn off the power, firmly insert the USB flash drive, and then turn on 

the power once again (p. 6, p. 23).

The USB flash drive was removed after you selected data that was on 

the USB flash drive.

The format of the USB flash drive is invalid.

Use the JUPITER-80 to format the USB flash drive (p. 81).

Data could not be written to the USB flash drive.

Make sure that USB flash drive is correctly connected (p. 6, p. 17).
Also make sure that you’re using a USB flash drive sold by Roland.

The format of the USB flash drive is invalid.

Use the JUPITER-80 to format the USB flash drive (p. 81).

Error Message List