Roland HP-2 用户手册

 

The recorder of the HP-2 has two recording tracks, allowing you to record the right 

and left hands separately. Use the [1] button or [2] button to specify the recording 

track.

If you want to re-do the recording, you can re-record just a specific track. 

 

fig.panel4-4

 

As described in steps 

 

 and 

 

 of “Recording a New Song” (p. 22), select “USr” before 

you continue. 

 

The [Rec] button’s indicator will light. 

The button indicators of tracks that are already recorded will light.

The track button for which you will next be recording will be blinking.

 

The indicator of the button you pressed will blink, and the HP-2 enters recording-

standby mode.

 

Go ahead and perform on the keyboard.

Note that recording will also begin as soon as you play anything on the keyboard, 

even if you do not press the [Play] button. There is no count sound played when you 

start in this manner.

 

Recording will stop, and the indicators for the [Play] and [Rec] buttons will go dark. 

Your performance has been recorded to the specified track button. 

If you want to record on the other track, return to step 2 to record your performance 

again. You can record while you listen to the previously recorded performance.

 

You will hear the recorded performance.

Press the [Play] button once again, and playback will stop.

If you go on to record 

additional material without 

erasing the recorded song, the 

song tempo, beat, and 

metronome settings of the 

original recording will be used 

for the new material as well. 

The track buttons allow you to 

record to either the [1] or the 

[2] button, one at a time.

When a recorded performance 

is played back, the metronome 

sounds the sound that was 

selected when the recording 

was made.

HP-2_e.book 24 ページ ２００３年１２月１７日　水曜日　午前１１時８分