Roland 5100009796-02 用户手册
57
System Settings (EDIT Mode)
This section explains how to make system settings for the A-PRO.
System settings include the following items.
System settings include the following items.
Category
Item
Contents
Factory setting
See page
LCD
LCD CONTRAST
Adjusts the LCD contrast.
5
Keyboard
KEYBOARD VELOCITY CURVE
Specifies how velocity will change in response to keyboard dynamics (velocity curve).
1-MEDIUM
KEYBOARD AFTERTOUCH CURVE
Specifies how keyboard aftertouch will respond.
1
KEYBOARD PORT SET
Specifies the port from which the keyboard and bender lever will transmit performance data.
PORT 1
KEYBOARD ACTIVE PART
Specifies the part(s) that will be affected by the [VALUE] knob, BENDER, MODULATION, AFTERTOUCH,
HOLD, and EXPRESSION controllers.
HOLD, and EXPRESSION controllers.
UPPER
TRANSPOSE
Specifies how the keyboard will be transposed when you turn on the [TRANSPOSE] button.
2
SHIFT KEY LATCH
Specifies whether the [SHIFT] button will operate in Unlatched mode (turning on when pressed, turning off
when released) or in Latched mode (alternately turning on/off each time it is pressed).
when released) or in Latched mode (alternately turning on/off each time it is pressed).
UNLATCH
Pads
PAD VELOCITY CURVE
Specifies how the velocity value transmitted when you strike a pad controller [A1]–[A8] will correspond to
the force with which you strike (velocity curve).
the force with which you strike (velocity curve).
1
PAD AFTERTOUCH CURVE
Specifies how the pad controllers [A1]–[A8] will respond to aftertouch.
1
Clock
MIDI CLOCK ON/OFF
Specifies whether MIDI CLOCK will be transmitted.
OFF
MIDI CLOCK DEFAULT TEMPO
Specifies the initial MIDI CLOCK value when “MIDI CLOCK ON/OFF” is On. After the power is turned on, this
tempo will be output until you move the [VALUE] knob to which TEMPO is assigned.
tempo will be output until you move the [VALUE] knob to which TEMPO is assigned.
120
MIDI CLOCK OUTPUT PORT
When “MIDI CLOCK ON/OFF” is On, this specifies the port from which MIDI CLOCK is transmitted.
PORT 1
USB
ADVANCED DRIVER MODE
Switches the driver mode.
ON
MIDI
MIDI I/F SWITCH
Specifies whether the MIDI connectors will be used as a MIDI interface.
ON
MIDI MERGE DESTINATION
Specifies the port that will be merged when the [MIDI MERGE] switch is On.
PORT 1
Control map
STARTUP MEMORY
Specifies which control map is to be called up when the power is turned on.
CTL MAP 0
Controller
FUNCTION
Specifies the parameter that will be transmitted by the [VALUE] knob.
KEY VELOCITY
A-300_500_800C_e.book 57 ページ ２０１０年２月２２日 月曜日 午後９時１３分