Roland LX-10F 用户手册

 

Before You Play

 

The pedals perform the following operations. You’ll use 

them mainly when playing piano.

 

Use this pedal to sustain the sound.

While this pedal is held down, notes will be sustained for an 

extended time even if you release your fingers from the 

keyboard.

With the damper pedal on an acoustic piano, when you step 

on the pedal it will at first offer only a slight amount of 

resistance, but as you press down further it will start to feel 

much heavier. On the LX-10F, this change in the feeling of 

resistance is simulated.

On an acoustic piano, when you step on the damper pedal, 

you’ll first hear the sound of the dampers releasing the 

strings. Then, you should also be able to hear the sound of 

strings adjacent to the ones for the notes actually played 

resonate sympathetically, resulting in a rich, resounding 

tone. 

Additionally, when using half-pedaling techniques, the core 

of the sound disappears rapidly while a rich, spacious 

resonance remains, producing a unique form of 

reverberation. On the LX-10F, the unique, lingering tones 

produced by the half-pedaling technique are reproduced in 

addition to released-string sounds (Damper Noise) and 

resonating sounds (Damper Resonance).

 

You can modify the sound of the damper releasing 

the string and the sound of the sympathetic 

 

The notes you are pressing when this pedal is depressed will 

be sustained.

 

This pedal is used to make the sound softer.

Playing with the soft pedal depressed produces a sound that 

is not as strong as when otherwise played with the 

equivalent strength. This is the same function as the left 

pedal of an acoustic piano.

The softness of the tone can be varied subtly by the depth to 

which you press the pedal.

 

You can switch the function of the sostenuto pedal 

 

If you disconnect the pedal cord from the LX-10F while 

the power is turned on, the pedal effect will remain 

applied. You must connect or disconnect the pedal 

cord while the LX-10F’s power is switched off.

 

About the Adjuster

 

If you feel that the pedal is unstable (for example if you’ve 

moved the LX-10F to a different location), you can adjust the 

adjuster located on the bottom of the pedals as follows.

Turn the adjuster to lower it until the adjuster is in firm 

contact with the floor. The pedal may be damaged if there is 

a gap between the adjuster and the floor. In particular, when 

you’ve placed the LX-10F on carpet, you must turn the 

adjuster until it is pressing firmly against the floor.

 

Using the Pedals

LX-10F_e.book 20 ページ ２０１０年１月１４日　木曜日　午後１０時４５分