Roland LX-10 用户手册
89
Various Settings
You can connect a commercially available USB CD drive to the
LX-10, and play back separately sold CD-ROMs created for the
VIMA (VIMA TUNES).
Songs on VIMA CD-ROM (VIMA TUNES) are programmed with
“recommended tones” suitable for each song.
When you select a song from a VIMA CD-ROM (VIMA TUNES),
recommended tones will be assigned to the LX-10’s [Strings],
[Voice], and [Others] tone buttons, and these three tone buttons
will blink.
When you press a flashing Tone button, the recommended tone
is then selected, enabling you to perform the selected song using
a tone matched to that song as it plays back.
You can set the LX-10 so that the recommended tones are
automatically assigned or not assigned.
This is set to “On” at the factory.
You can change the language that is displayed in the screen.
Normally, the settings of the various variations will revert to their
default values when the power is turned off. However, you can
specify that the various settings will be remembered even when
the power is turned off.
This function is called “Memory Backup.”
1.
Hold down the [Effects] button and press the
[3D] button.
The LX-10 will enter Function mode.
2.
Use the [
▲
] [
▼
] buttons to select “Memory
Backup.”
fig.d-FuncMenu-Backup.eps
3.
Press the [
] button.
The following appears in the display.
fig.d-Backup.eps
If you decide to cancel without executing, press the [Piano
Designer] button.
4.
If you’re sure you want to execute Memory
Backup, press [
].
A confirmation message appears in the screen.
fig.d-Backup2.eps
5.
Press the [
] button.
If you decide to cancel without executing, press the
[
] button.
When the memory backup operation is completed, the
function mode menu screen will appear.
For details on the items that are memorized, refer to
Switching VIMA TUNES Recommended
Tones (Recommended Tone)
Tones (Recommended Tone)
Setting
Description
On
When you select a song from a VIMA CD-
ROM (VIMA TUNES), recommended tones
will automatically be assigned to the LX-10’s
[Strings], [Voice], and [Others] tone buttons.
ROM (VIMA TUNES), recommended tones
will automatically be assigned to the LX-10’s
[Strings], [Voice], and [Others] tone buttons.
Off
The recommended tones are not used, and
only the LX-10’s internal tones can be
selected.
only the LX-10’s internal tones can be
selected.
Changing the Language Displayed in
the Screen (Language)
the Screen (Language)
Settings
English, Japanese
Remembering the Settings
(Memory Backup)
(Memory Backup)
NOTE
LX-10_e.book 89 ページ ２００８年９月２２日 月曜日 午前１０時５１分