Roland XV-88 用户手册

2. Press [UNDO/COMPARE].

The PATCH COMPARE page appears, making it 
possible to sound the save destination Patch.

fig.08-03.e

3. Play the keyboard to sound the save destination Patch, 

then check whether you really want to overwrite it.

The Patch auditioned using the Compare function may 
sound slightly different than when it is played normally.

4. If you want to change the save destination, use the 

VALUE dial, [INC/+]/[DEC/-] or numeric keys to 
specify the save destination Patch number.

5. Press [UNDO/COMPARE] once again to return to the 

PATCH WRITE page.

6. Press [ENTER] to execute the save operation.

You can keep the Patches and Rhythm Sets that you like to 
use all in one place by registering them on the Favorite List. 
This list allows you immediate access to your favorite 
Patches and Rhythm Sets, whether they are stored internally, 
on Wave Expansion Boards, or on memory cards. Up to a 
total of 64 Patches and Rhythm Sets can be registered on the 
Favorite List.

1. Make sure that the Patch or Rhythm Set you wish to 

register is selected.

2. Hold down [SHIFT] and press [PATCH FINDER].

The FAVORITE LIST page will appear.

fig.08-04

3. Use the VALUE dial, [INC/+]/[DEC/-] or numeric keys 

and specify the save-destination number.

No data is registered at the factory settings.

• By holding down [SHIFT] and pressing [UNDO/

COMPARE], you can cancel the registration of the Patch 
and Rhythm Set that is registered to the currently 
specified number.

• You can press

or

to search for a registered 

number.

• By holding down [SHIFT] and pressing

or

, 

you can find the empty number to which no data is 
registered. If no empty number can be found, “Favorite 
List Full” appears in the display.

4. Continue holding down [SHIFT], and the following 

display will appear.

fig.08-05

5. Hold down [SHIFT] and press [ENTER] to execute the 

registration.

Writing destination

You can register data to the Favorite List directly from 
the PATCH PLAY and RHYTHM PLAY pages. This 
makes it simple to register data, without having to bring 
up the FAVORITE LIST page or specify a destination 
number for the registration.

1. Make sure that the Patch or Rhythm Set you wish to 

save is selected.

2. Continue holding down [SHIFT], and the following 

display will appear.

fig.08-06

3. Hold down [SHIFT] and press [ENTER] to execute 

the registration and the display will briefly indicate 
“COMPLETED.”

Here, the data is registered to the lowest of the 
empty numbers to which no data is registered.

If there is no empty number to which data can be 
registered, “Favorite List Full” appears in the 
display, and the data cannot be registered.