Roland XV-88 用户手册

Selects the sound generator(s) (the internal sound generator 
and/or external sound generators connected to MIDI OUT 
connector) to be controlled by each slider.

: Neither will be controlled.

: Only the internal sound generator will be controlled.

: Only external sound generators will be controlled.

: Both the internal sound generator and external sound 

generators will be controlled.

fig.09-15

This function, which departs from previously used methods, 
and instead allows you to use MIDI messages to change Tone 
settings in realtime, is called the 

Similarly, the function allowing you to use MIDI messages to 
change Multi-effects settings in realtime is called the 

Normally, the Matrix Controller is used for making Patch 
settings, and the Multi-effects Controller for making settings 
to Performances, Patches, and Rhythm Sets. However, if the 
MIDI messages used as Matrix Controllers or Multi-effects 
Controllers need not be changed for each individual 
Performance, Patch, or Rhythm Set, or if you want to use 
specific MIDI messages for Matrix Controllers or Multi-
effects Controllers, make the settings for the 

. In other words, you could call the System 

Controllers global Matrix Controllers/Multi-effects 
Controllers for the entire XV-88.

You can use up to four System Controllers.

System Control Assign selects the MIDI message used as the 
System Controller.

: Controller numbers 1–31, 33–95

For more detailed information about Control Change 
messages, please refer to 

: Pitch Bend

: Aftertouch

Parameters in this group adjust the tuning of the internal 
sound generator, or change the temperament of the 
keyboard.

fig.09-16

Adjusts the overall tuning of the XV-88. The display shows 
the frequency of the A4 note (center A).

Shifts the overall pitch of the XV-88 in semitone steps.

Turn this ON when you wish to use a tuning scale other than 
equal temperament.

One set of Scale Tune settings can be created in Patch mode. 
In Performance mode and GM mode, each Part can have its 
own Scale Tune settings.

The XV-88 allows you to play the keyboard using 
temperaments other than equal temperament. The pitch is 
specified in one-cent units relative to the equal tempered pitch.

• One-cent is 1/100th of a semitone.

• The selected scale applies to MIDI messages received 

from an external MIDI device.

The SCALE page, in which the tuning settings are made, 
varies depending on the mode selected before [SYSTEM] 
is pressed.

fig.09-17

fig.09-18

If you wish to define a scale for use in Patch mode, press 
[SYSTEM] while in Patch mode, and then press [TUNE] 
located in the row of function buttons to access the PATCH 
SCALE page.

In Patch mode there are separate screens for the white keys 
and black keys, and the settings for one octave (C–B) will 
determine the tuning for all octaves.