Roland XV-88 用户手册

下载
页码 312
58
Chapter 4. Zone Settings
Making Settings While 
Comparing Zones (Palette Edit)
When modifying Zone settings for a Performance, the values 
for eight Zones (Zone 1–8 or Zone 9–16) will be displayed 
together on a single display. This is called the 
Palette page
This is useful when you wish to change parameter values 
while comparing each Zone settings.
1. When editing parameters that can be set individually in 
each Zone, press
or
to move the cursor to the 
parameter to be edited.
2. Press [PALETTE EDIT] to call up the Palette page.
fig.04-03
3. Press
or
to choose the Zone to modify.
When the Zone number is displayed, and that Zone’s 
Local Switch is set to ON, you can check which Parts are 
linked. Parts 1–16 are shown in order from left to right, 
and Parts for which the Zone’s MIDI transmit channel 
and the Part’s MIDI receive channel are matched are 
indicated by a 
o
 for the Part.
To switch between the palette page for Zones 1–8 and 
the palette page for Zones 9–16, press [1-8/9-16].
4. Use the VALUE dial, [INC/+]/[DEC/-], or the numeric 
keys to change the parameter value.
If you’ve made a mistake in setting the parameter value, 
press [UNDO/COMPARE] to restore the value to what 
it was.
5. If you wish to edit other parameters, 
press
or
to select the parameter that you wish 
to edit.
6. Repeat steps 3–5 to make the settings for the Zone.
7. To exit the Palette page, press [PALETTE EDIT], thus 
extinguishing the button’s indicator.
Functions of Zone Parameters
This section explains the functions the different Zone 
parameters have, as well as the composition of these 
parameters.
fig.04-01
Settings Common to the Entire 
Zone (COMMON)
ZONE COMMON
fig.04-04
Key Mode
The Key Mode determines how the XV-88 will sound when 
its keyboard is played.
LAYER
: When the keys are pressed, all Zones whose Local 
switches (Local parameter) are set to ON and the sounds for 
the linked (where the MIDI channels coincide) Parts are 
played. Transmission of MIDI messages from the keyboard 
controller section to external MIDI devices will be 
determined by the Transmit switch (Tx parameter) setting of 
each Zone.
fig.04-05.e
Zone 16 (Tx ch.16)
MIDI OUT
Zone 15 (Tx ch.15)
Zone 2 (Tx ch.2)
Zone 1 (Tx ch.1)
Local Switch
Transmit Switch
Part 1
(Rx ch.1)
Part 2
(Rx ch.2)
Part 16
(Rx ch.16)
Part 15
(Rx ch.15)