Roland XV-88 用户手册

6. Use

or

to move the cursor to the parameter you 

wish to modify.

7. Use the VALUE dial, [INC/+]/[DEC/-], or the numeric 

keys to modify the parameter value.

If you’ve made a mistake in setting a parameter value, or 
you have second thoughts about the changes, press 
[UNDO/COMPARE] to restore the value to what it was.

8. If you wish to move to another display group, press 

[EDIT] to make its indicator light, and use the function 
buttons.

You can also move to another display group by holding 
down [SHIFT] and using

or

. Since this can be 

done even when the [EDIT] indicator is dark, it is a faster 
way to get around because you don’t have to turn on the 
[EDIT] indicator each time.

9. Repeat steps 3–8 to complete a Rhythm Set.

10. When you finish making settings, press [EXIT] or 

[RHYTHM] to return to the RHYTHM PLAY page.

An asterisk 

 will be displayed at the left of the Rhythm 

Set group. This indicates that the Rhythm Set settings 
have been modified.

fig.06-03

If you select another Rhythm Set in the group with an 
asterisk 

, the modified Rhythm Set settings will be lost. 

To keep these modified settings, perform the save 
operation (p. 164).

When modifying Wave settings for a Rhythm Set, the values 
for four Waves will be displayed together on a single display. 
This is called the 

. Use it when you want to 

modify parameter values as you compare the settings of the 
four Waves.

1. When modifying a Wave, use

or

to move the 

cursor to the parameter you wish to modify.

2. Press [PALETTE EDIT] to call up the Palette page.

fig.06-04

3. Press TONE SELECT [1]–[4],

or

to choose the 

Wave to modify.

The Wave number and Wave name appear in the 
display.

4. Use the VALUE dial, [INC/+]/[DEC/-], or the numeric 

keys to change the parameter value.

If you’ve made a mistake in setting a parameter value, or 
you have second thoughts about the changes, press 
[UNDO/COMPARE] to restore the value to what it was.

5. If you wish to edit other parameters, 

press

or

to select the parameter that you wish 

to edit.

6. Repeat steps 3–5 to complete a Rhythm Tone.

7. To exit the Palette page, press [PALETTE EDIT], thus 

extinguishing the button’s indicator.

Rhythm Tone (percussion instrument) settings from any 
desired Rhythm Set can be copied to any desired key of the 
currently selected Rhythm Set. This function can help you 
save time.

1. Make sure a Rhythm Set is selected.