Roland AT-60S 用户手册
®ÂØÒňÎ
®
AT-60S
Atelier organ
TurboStart
TBS164 ©2002 Roland Corporation U.S., 5100 S. Eastern Ave., Los Angeles CA 90040 Faxback # 20197 Page 1
It’s a Fact…
The AT-60S is part of Roland’s Atelier
®
S-Series
home organs. Building on the popular R-Series, the
AT-60S includes:
AT-60S includes:
•
240 CD-quality GM2/
© sounds
•
16 drum sets, 1 SFX Set
•
128-note polyphony
•
56-key velocity-sensitive upper-keyboard, 76-key
velocity-sensitive lower-keyboard, 20 pedals
velocity-sensitive lower-keyboard, 20 pedals
•
130 preset music styles (6 overwriteable)
•
8 programmable registrations
•
7-track recorder with built-in metronome
•
Rotary Sound, Reverb, Chorus, Vibrato
•
Built-in 3.5” floppy disk drive
•
Touch screen with SMF lyric display
Intializing—Restoring Factory
Settings
Settings
Use the following procedure to clear the internal
memory and reload the factory settings:
Caution: All USER information will be lost. Be sure to
memory and reload the factory settings:
Caution: All USER information will be lost. Be sure to
back up any information you wish to keep.
1. Make sure there is no floppy disk in the drive.
2. Turn off the power.
3. While holding down the ONE TOUCH
2. Turn off the power.
3. While holding down the ONE TOUCH
PROGRAM button, turn on the power.
4. Release the ONE TOUCH PROGRAM button
when the screen reads: “Factory Preset is
Loaded.”
Loaded.”
Refer to the Owner’s Manual, pg. 23 for more
information.
information.
Selecting Tones
Use the following procedure to select a tone on the
upper keyboard:
upper keyboard:
1. Press a tone button (e.g. Full 1, Pipe 1, Theater
1, etc.) under ORGAN in the UPPER section
(located to the right of the screen.)
(located to the right of the screen.)
2. Press the ALTERNATE button under ORGAN in
the UPPER section to hear a variation of the
selected tone; press the ALTERNATE button
again to return to the original tone.)
selected tone; press the ALTERNATE button
again to return to the original tone.)
3. Press a tone button (e.g. Strings, French Horn,
Choir, etc.) under SYMPHONIC in the UPPER
section to hear two tones simultaneously.
section to hear two tones simultaneously.
Note: To hear only the SYMPHONIC tone, press the
selected tone button (indicator lit) under ORGAN in
the UPPER section until its indicator is not lit.
4. Press a tone button (e.g. Piano, A. Guitar, Brass,
etc.) under ORCHESTRAL in the UPPER
section to hear three tones simultaneously.
section to hear three tones simultaneously.
5. To select a tone on the lower keyboard, repeat
steps 1–4, substituting the word LOWER for the
word UPPER.
word UPPER.
Refer to the Owner’s Manual, pp. 34–37 for more
information.
information.
Selecting Music Styles
Use the following procedure to select a Music Style
from internal memory:
from internal memory:
1. Press a rhythm button (e.g. Ballad, Latin,
Acoustic etc.) in the RHYTHM section (located
on the left side of the organ.)
on the left side of the organ.)
2. Touch a MUSIC STYLE on the screen.
Note: You will see 8 Music Styles on the screen;
touch [t] or [u] on the screen to see additional
Music Styles.
3. Press the START/STOP button (located to the
left of the upper keyboard) to play the MUSIC
STYLE; press the START/STOP button again to
silence the organ.
STYLE; press the START/STOP button again to
silence the organ.
Refer to the Owner’s Manual, pp. 57–58 for more
information.
information.
Use the following procedure to select a Music Style
from disk:
from disk:
1. Press the DISK button in the RHYTHM section.
2. Insert a compatible Music Styles Disk (i.e. MSA,
2. Insert a compatible Music Styles Disk (i.e. MSA,
MSE, or MSD) into the drive.
3. Touch a MUSIC STYLE on the screen.
4. Press the START/STOP button (located to the
4. Press the START/STOP button (located to the
left of the upper keyboard) to play the MUSIC
STYLE; press the START/STOP button again to
silence the organ.
STYLE; press the START/STOP button again to
silence the organ.
Refer to the Owner’s Manual, pp. 70–72 for more
information.
information.