Roland XP-30 用户手册
54
Chapter 2. Playing
■
Assigning a Different Patch to a
Part
The Patch assigned to each Part can be stored as a
Performance parameter.
Performance parameter.
1. Make sure that the PERFORM PLAY display is showing.
2. Press [
] or [
] to choose the Part to which you want
to assign a different Patch.
3. While holding down [PERFORM], press [PATCH] to call
up the PLAY display (PART PLAY) of the Patch assigned
to a specific Part.
to a specific Part.
fig.2-13
The upper right of the display will indicate the number of the
currently selected part (the current part).
currently selected part (the current part).
4. Use the same procedure as in Patch mode to select a
* This setting is linked with the Group parameter and Number
parameter (PERFORM/PART/PATCH).
5. Press [PERFORM] or [EXIT] to return to the PERFORM
PLAY display.
■
Using the Sliders to Modify the
Sound in Realtime
(Sound Palette Function)
Using the
Sound Palette function
, you can modify sound
characters of the Patch assigned to a Part or adjust the
volume level of each Part.
volume level of each Part.
* Sound variations or volume changes made with the Sound
Palette function affect only the performance. They have no effect
on the currently selected Performance, so the Sound Palette
settings cannot be saved. If you change the Performance, these
settings will be lost.
on the currently selected Performance, so the Sound Palette
settings cannot be saved. If you change the Performance, these
settings will be lost.
* The sound character and volume changes created using the
Sound Palette will also be transmitted to the external MIDI
devices.
devices.
Changing Sound Characters
* If Single Performance is selected, the effect applies only to the
current Part. With Layer Performance selected, this affects only
the Parts with Local parameter (PERFORM/MIDI/MIDI) set
ON.
the Parts with Local parameter (PERFORM/MIDI/MIDI) set
ON.
1. Make sure that the PERFORM PLAY display is showing.
2. Press [FILTER/ENV] to light its indicator.
3. Move the sliders while you play the XP-30’s keyboard to
vary the sound.
To change brightness, move the CUTOFF slider.
To change resonance, move the RESO slider.
To change attack time, move the ATTACK slider.
To change decay time, move the DECAY slider.
To change resonance, move the RESO slider.
To change attack time, move the ATTACK slider.
To change decay time, move the DECAY slider.
Changing the Level (Volume) of Each Part
1. Make sure that the PERFORM PLAY display is showing.
2. Press [LEVEL] to light its indicator.
3. Press [
] or [
] to select the Part whose level (volume)
you want to change.
If you’ve selected any of Parts 1–4, sliders 1, 2, 3, and 4 adjust
Parts 1, 2, 3, and 4, respectively.
If you’ve selected any of Parts 5–8, sliders 1, 2, 3, and 4 adjust
Parts 5, 6, 7, and 8, respectively.
If you’ve selected any of Parts 9–12, sliders 1, 2, 3, and 4
adjust Parts 9, 10, 11, and 12, respectively.
If you’ve selected any of Parts 13–16, sliders 1, 2, 3, and 4
adjust Parts 13, 14, 15, and 16, respectively.
Parts 1, 2, 3, and 4, respectively.
If you’ve selected any of Parts 5–8, sliders 1, 2, 3, and 4 adjust
Parts 5, 6, 7, and 8, respectively.
If you’ve selected any of Parts 9–12, sliders 1, 2, 3, and 4
adjust Parts 9, 10, 11, and 12, respectively.
If you’ve selected any of Parts 13–16, sliders 1, 2, 3, and 4
adjust Parts 13, 14, 15, and 16, respectively.
4. Move the slider as you play to adjust the level (volume)
of each Part as desired.