Roland AX-Synth 用户手册

Making connections

(3) Insert 8 rechargeable AA-type Ni-MH batteries 

into the compartment (4 on either side), taking 
care to orient them in accordance with the “+” and 
“–” indications.

(4) Close the AX-Synth’s battery compartment.

If, while using batteries, three flashing dots appears 
in the display, the remaining battery power is low. 
Replace the batteries at your earliest convenience. 
Three constantly lit dots mean that you need to 
replace the batteries right away (or use the supplied 
adaptor).

Note: The AX-Synth cannot recharge your batteries.

Note: The battery charge indication is only an approxima-
tion.

Certain batteries can be recharged several times 
before they need to be replaced with a new ones. 
Note that it is normal for the batteries to last 
increasingly shorter as time goes by. At the end of 
their life cycle, they may only last one hour, for 
example. But that is a gradual process.

The AX-Synth needs to be connected to audio equip-
ment, such as a keyboard amplifier, a mixing console, 
active speakers, etc.

(1) Connect the OUTPUT jacks on the AX-Synth’s rear 

panel to the input jacks of your external device.

Please choose unbalanced (mono) cables with 1/4” 
jacks at one end (for the AX-Synth). The connectors 
at the other end need to match the input sockets of 
the device to which you are connecting the 
AX-Synth.

Note: If your amplifier is monaural, you only need to con-
nect the L/MONO socket.

(2) Set the ATT switch to the “OFF” position.

Note: You can also connect headphones to the PHONES 
socket, in which case you do not need to establish an audio 
connection.

INPUT L & R

AX-Synth_e2  Page 14  Monday, October 12, 2009  3:41 PM