Roland 5 用户手册

Europa User Guide

Europa User Guide Configuration options and action functions

Configuration options and action functions

Page 25

Modulation wheel assign (1)

Modulation wheel assign (1)
Europa can assign incoming messages to any controller controlled slider or knob on the Jupiter 6’s front
panel. This function assigns the modulation wheel input to a given slider or knob. Here is how to assign:

• Press and hold TAPE

TAPE

• Press and release button 1

(modulation wheel assign)

• The TAPE

TAPE

light will blink

• Release the TAPE

TAPE

button

• Move any slider/knob desired. This will not alter the current patch or preset

• Press and release TAPE

TAPE

. The last slider/knob moved before TAPE

TAPE

is pressed again is where the

modulation wheel will be assigned

To unassign:

• Press and hold TAPE

TAPE

• Press and release button 1

(modulation wheel assign)

• The TAPE

TAPE

light will blink

• Don’t touch any sliders or knobs

• Press and release TAPE

TAPE

. This unassigns the modulation wheel from anything it is currently assigned

to.

Pitch bend assign (2)

Pitch bend assign (2)
Identical to modulation wheel assign, but instead assigns incoming MIDI pitch bend messages to a
controller controlled slider or knob. Follow the instructions in the Modulation wheel assign

Modulation wheel assign

section

above, but instead press button 2

as documented in Figure 6).

Pitch bend messages can vary in range from –8192 to 8191, which is far more resolution than any
controller on the Jupiter 6 has. Europa scales pitch bend values –8192 through 0 to 0-63, and pitch bend
values 0 through 8191 to 64-127. A centered pitch bend wheel will set a slider or knob to mid scale (64).

Aftertouch assign (3)

Aftertouch assign (3)
This assigns incoming MIDI channel aftertouch messages to a given slider/knob. Follow the instructions
in the Modulation wheel assign

Modulation wheel assign

section above to assign channel aftertouch, but instead press

button 3

as documented in Figure 6).

Velocity assign (4)

Velocity assign (4)
This assigns note velocity to a given slider or knob. In addition to the MIDI note on turning on the
appropriate note, it also sets the assigned slider/knob to the value of the note’s velocity on receipt of each
note! As an example, assigning ENV

ENV

ENV----2 LEVEL

2 LEVEL

to velocity will cause the ENV

ENV

ENV----2 LEVEL

2 LEVEL

to be changed

after every MIDI note ON received.

NOTE

NOTE

: The velocity assign will change the value of the controller for the entire voice board – not just the

incoming note!

The instructions in the Modulation