Roland C-200 用户手册
14
Panel Descriptions
1.
USB MEMORY port
This port is mainly intended for compact storage
devices, like a USB Flash memory (Roland M-UF-series).
You can use it to save the songs you recorded and to
play them back.
devices, like a USB Flash memory (Roland M-UF-series).
You can use it to save the songs you recorded and to
play them back.
2.
PK In socket
This is where you can connect an optional pedal key-
board unit (Roland PK-25A, PK-7A, etc.).
board unit (Roland PK-25A, PK-7A, etc.).
3.
MIDI In/Out connectors
Use these when you want to transmit or receive MIDI
messages to or from an external MIDI device.
messages to or from an external MIDI device.
4.
Pedal Sustain socket
You can connect an optional DP-series damper pedal to
this jack.
this jack.
5.
Pedal EXP socket
You can connect an optional expression pedal (Roland
EV-5, EV-7, etc.) to this socket.
EV-5, EV-7, etc.) to this socket.
6.
Output R, L/Mono sockets
These sockets can be connected to an external amplifier,
mixer, audio recorder, etc.
mixer, audio recorder, etc.
7.
DC IN socket
Connect the supplied AC adaptor (PSB-7U) here. See
also p. 16.
also p. 16.
8.
Ground terminal
Rear panel
C-200_e.book Page 14 Monday, April 4, 2011 5:22 PM