Roland PC-70 用户手册
18
Changing the Velocity Sensitivity: Velocity
Whenever a key is pressed on the instrument, the value for velocity will be transmitted along
with the note information. The following setting allows you to choose the sensitivity of the
response to velocity (range of possible change).
with the note information. The following setting allows you to choose the sensitivity of the
response to velocity (range of possible change).
fig.VeloCurv.e
fig.velocity.e
[Procedure]
1.
Set the MIDI channel to match that of the Part (sound module) to be controlled.
2.
Press
MIDI/SELECT [3]
(LED will show “SEL”).
3.
Press the
F#3 black key (VELOCITY) [8]
.
4.
Press
MIDI/SELECT [3]
again to confirm your selection. Move the
DATA ENTRY
slider
to select the minimum value, thus setting the desired range for velocity. With
the slider at its maximum, velocity values within the entire 1–127 range can be
generated.
generated.
Slider position: minimum
Strength of key touch
Velocity value
Slider position: center
Strength of key touch
Velocity value
Slider position: maximum
Strength of key touch
Velocity value
Velocity