Roland AT800 用户手册
27
Before You Start Playing
Before You Start Playing
Rotating the External Memory
Connector Holder
The External Memory connector holder rotates 90 degrees left
and right. Rotating the External Memory connector holder
allows you to avoid damaging the connected external memory
if something happens to bump against it.
and right. Rotating the External Memory connector holder
allows you to avoid damaging the connected external memory
if something happens to bump against it.
1.
Grasp the External Memory connector holder
and turn it 90 degrees to the left or right.
and turn it 90 degrees to the left or right.
Be sure to grasp the External Memory connector holder itself
when rotating it. Never rotate the External Memory
connector holder by holding the connected external
memory.
when rotating it. Never rotate the External Memory
connector holder by holding the connected external
memory.
Take care not to allow your fingers to become pinched
when rotating the External Memory connector holder.
when rotating the External Memory connector holder.
Attach the floppy disk drive as shown the figure, using the
mounting holes on the ATELIER’s bottom panel.
mounting holes on the ATELIER’s bottom panel.
For details of the attachment, refer to the owner’s manual of
the floppy disk drive.
the floppy disk drive.
1.
Connect the USB cable of the floppy disk drive
to the ATELIER’s Ext Drive connector.
to the ATELIER’s Ext Drive connector.
External Memory
Holder
90 degrees
to the right
to the right
90 degrees
to the left
to the left
NOTE
NOTE
Connecting the Floppy Disk Drive
Ext Drive
Connector
USB Cable
AT-800_e.book 27 ページ ２００８年１０月１５日 水曜日 午前９時３７分