Roland AT800 用户手册

 

Selecting and Playing Sounds

 

The Vintage Organ button lets you add three types of vintage organ sounds 
to the upper, lower, and pedal parts.

In addition, you can also use the harmonic bars to modify the selected sound 
as desired.

The ATELIER provides nine harmonic bars for the upper part and lower part 
respectively, and two harmonic bars for the pedal part. 

Each harmonic bar is assigned a sound of a different footage (pitch), and by 
layering these sounds you can create a variety of organ tones.

 

By sliding the harmonic bars forward or backward (in or out), you can adjust 
the volume of the various footages.
The volume can be adjusted over nine steps (0–8). 
When a harmonic bar is pulled out all the way (8), the volume is loudest. 
When it is pushed in all the way (0), there will be no sound.

8’ is the footage that forms the basic pitch of the sound; this is the center 
around which you create the tone.
Each harmonic bar is assigned a sine wave (a pure pitch without overtones) 
of a different pitch, and by combining these pitches you can create a wide 
range of sounds.

You can use the Solo part’s 
harmonic bars to adjust the 
volume of the Solo part voice.

If you’ve selected 

“

Pipe

”

 or 

“

Theater

”

 as the vintage organ 

type, the harmonic bars will 
turn the various footages on or 
off.

AT-800_e.book 54 ページ ２００８年１０月１５日　水曜日　午前９時３７分