Roland AT800 用户手册

 

Using Rhythm Performance

 

Using Rhythm Performance

 

The copying of the Rhythm to User memory begins.

When copying ends, the “- - - - -” in the screen will change to the Rhythm name 
that you copied.

If you select a number in which a Rhythm is already saved, a screen like the 
following will appear.

 

fig.02-25.eps

 

If you want to delete the previously saved Rhythm and overwrite it with the 
Rhythm you’re newly saving, touch <OK>.

If you don’t want to delete the previously saved Rhythm, touch <Cancel>, then 
select a number at which no Rhythm has been saved, and copy the Rhythm to 
that number.

 

You can copy Rhythms from user memory to USB memory.

In this case, touch the arrow icon located in the center of the “Rhythm File 
Copy screen” in step 5 of the above procedure, so the arrow points upwards. 
In this state, you’ll be copying Rhythms from user memory to USB memory.

The rest of the procedure is the same as when copying Rhythms from USB 
memory to user memory.

Never remove the USB memory 
or turn off the power while the 
Rhythm data is being copied 
from USB memory into the 
ATELIER. If you do so, the 
Rhythm data will not be loaded 
into the ATELIER, and 
malfunctions could result. After 
returning the Rhythm stored in 
the user memory to the factory 
settings (p. 231), copy the 
Rhythm from USB memory once 
more.

You can return only the user 
memory to the factory settings. 
Refer to “Restoring the User 
Memory to the Original Factory 
Settings” (p. 231).

AT-800_e.book 99 ページ ２００８年１０月１５日　水曜日　午前９時３７分