Roland At-20s 产品宣传页
®ÂØÒňÎ
®
AT-20S
Atelier organ
TurboStart
TBS163 ©2002 Roland Corporation U.S., 5100 S. Eastern Ave., Los Angeles CA 90040 Faxback # 20196 Page 1
It’s a Fact…
The AT-20S is part of Roland’s Atelier
®
S-Series
home organs. Building on the popular R-Series, the
AT-20S includes:
AT-20S includes:
•
150 CD-quality GM2/
© sounds
•
8 drum sets, 1 SFX Set
•
64-note polyphony
•
49-key upper-keyboard, 61-key lower-keyboard,
13 pedals
13 pedals
•
90 preset music styles (2 overwriteable)
•
4 programmable registrations
•
7-track recorder with built-in metronome
•
Rotary Sound, Reverb, Chorus
•
Built-in 3.5” floppy disk drive
•
LCD screen with SMF lyric display
Intializing—Restoring Factory
Settings
Settings
Use the following procedure to clear the internal
memory and reload the factory settings:
Caution: All USER information will be lost. Be sure to
memory and reload the factory settings:
Caution: All USER information will be lost. Be sure to
back up any information you wish to keep.
1. Make sure there is no floppy disk in the drive.
2. Turn off the power.
3. While holding down the ONE TOUCH
2. Turn off the power.
3. While holding down the ONE TOUCH
PROGRAM button, turn on the power.
4. Release the ONE TOUCH PROGRAM button
when the screen reads: “Factory Preset is
Loaded.”
Loaded.”
Refer to the Owner’s Manual, pg. 18 for more
information.
information.
Selecting Tones
Use the following procedure to select a tone on the
upper keyboard:
upper keyboard:
1. Press a tone button (e.g. Full, Jazz, Pipe, etc.)
under ORGAN in the UPPER section (located to
the right of the screen.)
the right of the screen.)
2. Press a tone button (e.g. Strings, Piano, Brass,
etc.) under ORCHESTRAL in the UPPER
section to hear two tones simultaneously.
section to hear two tones simultaneously.
Note: To hear only the ORCHESTRAL tone, press
the selected tone button (indicator lit) under ORGAN
in the UPPER section until its indicator is not lit.
3. Press a tone button (e.g. Trumpet, Sax, Flute,
etc.) under SOLO in the UPPER section to hear
three tones simultaneously.
three tones simultaneously.
4. To select a tone on the lower keyboard, repeat
steps 1–2, substituting the word LOWER for the
word UPPER.
word UPPER.
Refer to the Owner’s Manual, pg. 22 for more
information.
information.
Selecting Music Styles
Use the following procedure to select a Music Style
from internal memory:
from internal memory:
1. Press a rhythm button (e.g. Big Band/Swing,
Country/Oldies, Latin, etc.) in the RHYTHM
section (located on the left side of the organ.)
section (located on the left side of the organ.)
2. Use the VALUE [+] and [-] buttons (located to the
left of the screen) to select a rhythm.
3. Press the RHYTHM button again.
4. Press the START/STOP button (located to the
4. Press the START/STOP button (located to the
left of the upper keyboard) to play the MUSIC
STYLE; press the START/STOP button again to
silence the organ.
STYLE; press the START/STOP button again to
silence the organ.
Refer to the Owner’s Manual, pp. 30–32 for more
information.
information.
Use the following procedure to select a Music Style
from disk:
from disk:
1. Press the DISK button in the RHYTHM section.
2. Insert a compatible Music Styles Disk (i.e. MSA,
2. Insert a compatible Music Styles Disk (i.e. MSA,
MSE, or MSD) into the drive.
3. Use the SELECT [+] and [-] buttons (located in
the COMPOSER section) to select a rhythm.
4. Press the START/STOP button (located to the
left of the upper keyboard) to play the MUSIC
STYLE; press the START/STOP button again to
silence the organ.
STYLE; press the START/STOP button again to
silence the organ.
Refer to the Owner’s Manual, pg. 37 for more
information.
information.