Roland C-380 用户手册

Performing

Two kick switches are located on the sides of the expression pedal. You can assign a different function to each of these two kick

switches.

fig.foot-switch.eps

From the main screen, press the [Select/Menu] knob.

Turn the [Select/Menu] knob to select “8 Exp. Pedal.”

fig.LCD009.eps

Press the [Select/Menu] knob to access the “Exp. Pedal” screen.

You can also access the “Exp. Pedal” screen from the main screen by holding in the [SET] piston and operating the

expression pedal.

Turn the [Select/Menu] knob to select “Kick SW R” (right kick switch) or “Kick SW L” (left kick switch).

fig.LCD031.eps

Turn the [Value/Exit Menu] knob to adjust the value.

Press the [Value/Exit Menu] knob twice to return to the main screen.

This setting will return to “OFF” when you turn off the power, but you can store the setting so that it will be remembered

even after the power is turned off. For details, refer to “Storing Your Settings (Customize)” (p. 73).

Using the Kick Switches

Assignable function

Explanation

OFF

The kick switch will be off.

This has the same function as the [NEXT] piston.
It will switch to the adjacent general memory piston. Each time you press the kick
switch, the general memory piston will switch to the next higher number.

This has the same function as the C-380’s [PREV] piston.
It will switch to the adjacent general memory piston. Each time you press the kick
switch, the general memory piston will switch to the next lower number.

SUSTAIN

Sustain will be applied while you are pressing the switch.
* Sustain can be applied only to some of the [USER/MIDI] coupler sounds and to the

sounds of an external MIDI sound module.

* Sustain will not be applied to the sounds of the organ.

C-380_330_e.book 45 ページ２０１０年４月２８日　水曜日　午後１０時１１分