Roland C-380 用户手册
70
Other Settings
Settings for transmitted messages
Here’s how to specify the MIDI messages that will be transmitted
when a [USER/MIDI] coupler is on.
1.
From the main screen, press the [Select/Menu] knob.
2.
Turn the [Select/Menu] knob to select “5 USER/MIDI
Coupler.”
fig.LCD006.eps
3.
Press the [Select/Menu] knob to access the “USER/MIDI”
screen.
4.
Turn the [Select/Menu] knob to move the cursor to the
top position, and then turn the [Value/Exit Menu] knob
to select the tablet that you want to change the settings.
fig.LCD093.eps
5.
Turn the [Select/Menu] knob to select item, and then turn
the [Value/Exit Menu] knob to change the settings.
fig.LCD074.eps
6.
Press the [Value/Exit Menu] knob twice to return to the
main screen.
Indication
Tablet name
MAN-I A
MAN I (lower) [USER MIDI A]
MAN-I B
MAN I (lower) [USER MIDI B]
MAN-II A
MAN II (upper) [USER MIDI A]
MAN-II B
MAN II (upper) [USER MIDI B]
PEDAL A
PEDAL (pedalboard) [USER MIDI A]
PEDAL B
PEDAL (pedalboard) [USER MIDI B]
Indication
Explanation
Range
Name
Select by sound name
Name of sound
PC Number
Program change number
OFF, 1–128
Bank MSB
Bank select MSB
OFF, 0–127
Bank LSB
Bank select LSB
OFF, 0–127
Volume
Specifies the volume
OFF, 0–127
Octave
Specifies the octave (pitch)
-2–+2
Reverb
Specifies the depth of reverb
OFF, 1–127
Chorus
Specifies the depth of chorus
OFF, 1–127
Velocity
Velocity value
KBD:
The keyboard’s velocity will be used
The keyboard’s velocity will be used
EXP:
The expression pedal’s position will be used
The expression pedal’s position will be used
2–127:
The specified value will be used as the velocity
The specified value will be used as the velocity
Expression
Expression Pedal
OFF, ON
Indication
Explanation
Range
Selecting sounds on your external MIDI device
How sound names are displayed
If an MX-200 or a GM2 compatible sound module is connected,
you can set “Tone Name” to the model of sound module you’re
show the names of the sounds, allowing you to choose sounds
by name.
Using the keyboard to select
Even when the “USER/MIDI” screen is not shown, you can use
the following method to select sounds on your external MIDI
device.
1.
Turn on the desired [USER/MIDI] coupler.
2.
Hold down the [SET] piston and play a note on the
keyboard and the pedalboard.
The [USER/MIDI] coupler will blink.
The program change corresponding to the note you played
will be transmitted, and the sound selection on your MIDI
device will change.
Each note of the keyboards corresponds to the following
program changes.
Keyboard
Tone name
Program change
Lower keyboard
C2–C7
1–61
Upper keyboard
C2–C7
62–122
Pedalboard
C2–F2
123–128
C-380_330_e.book 70 ページ ２０１０年４月２８日 水曜日 午後１０時１１分