Roland C-380 用户手册
73
Other Settings
6.
Press the [SET] piston.
The Factory Reset will be executed. Do not turn off the power
while the following screen is displayed.
fig.LCD963.eps
7.
When the Factory Reset has been completed, the
following screen will appear.
Turn the power off, then on again.
fig.LCD964.eps
The following settings will return to their default state when you
switch off the organ's power, but you can use the procedure
described below to store these settings.
* What is the Default Voice Palette?
The “Default Voice Palettes” specifies which variation sound will be
heard when you turn on a specific tablet.
If you specify the variation sounds that you frequently use, you’ll be
able to play those variation sounds simply by selecting those
tablets, without needing to select the variation sounds.
1.
Hold down the [SET] piston and press the [0] piston.
Confirmation screen will appear
fig.LCD900.eps
2.
Turn the [Value/Exit Menu] knob to choose the group.
• If you choose “VOICING,” the VOICING group settings will be saved.
• If you choose “SYSTEM,” the SYSTEM group settings will be saved.
3.
Press the [SET] piston to store the settings.
If you decide to cancel, press the [Value/Exit Menu] knob.
Never turn off the power before the storage has been
completed. (Wait until the “Executing” indication is no longer
shown.)
Storing Your Settings (Customize)
Setting
Group
Default Voice Palettes (*)
VOICING
“User/MIDI coupler” screen settings
“Tremulant” screen settings
“Room Modeling” screen settings
SYSTEM
“Console” screen settings (except for V-LINK)
“Exp. Pedal” screen settings
“Audio” screen settings
Satellite Volume settings
“MIDI” screen settings (except for Local ON/OFF)
“Guide Tone” and “Guide Volume” settings in “Song
Recorder” screen
Recorder” screen
C-380_330_e.book 73 ページ ２０１０年４月２８日 水曜日 午後１０時１１分