Roland RM-700 用户手册

 

Connecting External Devices

 

If you use a USB cable (commercially available) to connect the USB 

connector to the USB connector of your computer, you’ll be able to 

do the following things.

• Use the RM-700 to play SMF music files played back by MIDI-

compatible software.

• By transferring MIDI data between the RM-700 and your sequencer 

software, you’ll be able to enjoy a wide range of possibilities for 

music production and editing.

Connect the RM-700 to your computer as shown below.

 

• To prevent malfunction and/or damage to speakers or other 

devices, always turn down the volume, and turn off the power on all 

devices before making any connections.

• Only MIDI data can be transmitted and received via USB. Data for a 

song recorded on the RM-700 cannot be transmitted or received.

• A USB cable is not included. If you need to obtain one, ask the dealer 

where you purchased the RM-700.

• Switch on power to the RM-700 before you start up the MIDI 

application on your computer. Don’t turn the RM-700’s power on/

off while your MIDI application is running.

Refer to the Roland website for system requirements.

Roland website: http://www.roland.com/

 

Normally, you don’t need to install a driver in order to connect the 

RM-700 to your computer. However, if some problem occurs, or if 

the performance is poor, using the Roland original driver may solve 

the problem.

For details on downloading and installing the Roland original driver, 

refer to the Roland website.

Roland website: http://www.roland.com/

Specify the USB driver you want to use, and then install the driver. 

 

Connecting Your Computer

RM-700_e.book 200 ページ ２００９年３月１８日　水曜日　午前１１時５分