Roland AT900 用户手册

 

Recording/Playing Back What You Play

 

Recording/Playing Back What You Play

 

If you made a mistake in your performance during recording 
etc., you can re-record just a portion of the musical data in the 
track.

 

If you wish to re-record with different settings for voices, 
tempo, part balance, erase the recorded song (p. 178) and 
re-record again. If the Control track still contains data from 
before you re-recorded, the volume or sounds may change 
during playback.

 

The Rec/Play screen appears.

 

fig.07-04-2.eps

 

If you wish to start recording from the beginning of the 
song, touch the <Reset> button.

 

<Play> and the unrecorded track buttons in the screen 
will blink. The button indicators of tracks that are already 
recorded will light.

 

fig.07-15.eps

 

Also, the panel [Rec] button indicator will light, and 
[Play/Stop] button will blink.

 

You can also enter recording-standby mode by pressing the 
[Rec] button.

 

The song data of the specified Track (with the exception 
of the Control Track) will be erased as new song data is 
recorded.

 

When the Track button is lit constantly, no song data has 
been recorded on that Track.

 

The metronome will sound a two-measure count, and 
then recording will begin.

 

You can also start recording by pressing the [Play/Stop] 
button.

 

The track buttons which were re-recorded will change 
from flashing to being constantly lit.

 

You can also stop recording by pressing the [Play/Stop] 
button.

If you wish to keep the existing Expression Pedal data, and 
record only the panel operations, you can make settings to 
prevent the operation of the Expression Pedal from being 
recorded (p. 211).

You can use punch-in recording (p. 185) to re-record only 
the area that you specify.

AT-900_e.book 177 ページ ２００７年９月７日　金曜日　午前８時４３分