Roland AT900 用户手册

Before You Start Playing

Attaching the Music Rest (AT-900)

Insert the supplied screws for the music rest into the
screw holes located on the top of the instrument,
and lightly tighten them (two locations).

Put the music rest between the screws and the
ATELIER’s body.

While supporting the music rest with one
hand, secure it in place by turning the screws.

When attaching the music rest, support it firmly with one
hand to make sure that you don’t drop it. Be careful, so
you don’t get your fingers pinched.

To set up the music stand, always use both hands
to lift the base, and pull it gently toward yourself.

fig.00-24.eps

Do not apply excessive force to the installed music rest.

Be sure to use the supplied screws for attaching the music
rest.

Before moving the piano, be sure to remove the music rest to
prevent accidents.

Attaching the Music Rest (AT-900C)

Place the music rest on top of the AT-900C and
align the screw hole locations.

Insert the included music stand fastening
screws into the screw holes of the music stand,
and loosely tighten them (two locations).

Put the music rest between the screws and the
ATELIER’s body.

While supporting the music rest with one
hand, secure it in place by turning the screws.

When attaching the music rest, support it firmly with one
hand to make sure that you don’t drop it. Be careful, so
you don’t get your fingers pinched.

Removing the Music Rest

To remove the music rest, support it with one
hand while loosening the screws.

Remove the music rest.

After removing the music rest, don’t forget to retighten
the screws.

Setting Up the Music Rest

Screw

NOTE

Screw

AT-900_e.book 21 ページ２００７年９月７日　金曜日　午前８時４３分