Roland SH-32 用户手册
23
Producing Sound
Quick Start
Listening to the Preset Sounds
The SH-32 comes with 128 different Preset Patches, so you can immediately enjoy
having a wealth of sounds at your fingertips.
having a wealth of sounds at your fingertips.
fig.004
1
Press [BANK].
[BANK] lights up, and [1/A]–[4/D] and [8/R] blink.
2
Select a bank.
Press [1/A]–[4/D] to select a bank (“A” through “D”).
The selected bank is shown in the display.
fig.005
3
Select a Patch number.
Press [1/A]–[8/R] twice to select a Patch number (“11” through “88”). Press the first
button to enter the 2nd digit of the number. Then press another to enter the first digit
of the number.
button to enter the 2nd digit of the number. Then press another to enter the first digit
of the number.
The selected Patch number is shown in the display.
4
sounds.
The selected sound will be heard.
45) for detailed information
about the Patches.
about the Patches.
“A11” through “B88” are User
Patches, “C11” through “D88”
are Preset Patches. When
shipped from the factory, the
User Patches are the same as
the Preset Patches.
Patches, “C11” through “D88”
are Preset Patches. When
shipped from the factory, the
User Patches are the same as
the Preset Patches.
Display
1
2, 3
In step 1, if all of the buttons
from [1/A] through [8/R] are
blinking after you press
[BANK], you will need to press
[PATCH/PERFORM] to turn
them off, then press [BANK]
again (Patch mode p. 20).
from [1/A] through [8/R] are
blinking after you press
[BANK], you will need to press
[PATCH/PERFORM] to turn
them off, then press [BANK]
again (Patch mode p. 20).
Bank
Patch number
When a Patch number is
shown in the display, you can
also press [VALUE ▼/▲] to
select a preset sound.
shown in the display, you can
also press [VALUE ▼/▲] to
select a preset sound.