Roland SH-32 用户手册

The LFO creates waveforms that can control the oscillator, filter, and amp, and add 
some extra change to the sound.

The SH-32 has two LFOs. Each LFO can be used independently in setting a different 
modulation depth with respect to the oscillator, filter, amp, and pan.

fig.017

The pressed button blinks, indicating that it is available for control.

When the button is illuminated, it indicates that the LFO is turned on (when turned 
off, the button is extinguished).

fig.018

The indicator of the selected waveform lights up. To select a waveform on the lower 
row, get the two indicators above the waveform to light.

fig.020

The manner in which sound changes depends on the waveform.

on LFO.

The LFO control panel controls 
both LFO 1 and LFO 2. When 
you select LFO 2 after setting 
LFO 1, the values of settings 
may not match the positions of 
the panel controls. This 
happens because, even after 
you select the other LFO, the 
panel controls remain at the 
same positions. Be careful with 
the position of controls when 
you are operating with LFO 1 
and LFO 2 at different settings.

LFO 2 off / LFO 1 on

You can control 
LFO 1 parameters.

LFO 2 on / LFO 1 off

You can control 
LFO 2 parameters.

LFO 2 on / LFO 1 on

You can control the parameters of 
the LFO whose button is blinking.

blinking

lit

blinking

blinking

waveforms.

The selected waveform

The selected waveform