Roland SH-32 用户手册
65
Chapter 3. Applying Effects to the Sound (INS-FX, REV/DELAY)
Chapter 3
Setting the Insertion Effects
You can set a variety of parameters in each Patch or Rhythm Set for
the Insertion Effects selected with the effect type.
the Insertion Effects selected with the effect type.
Using the INTENSITY Knob
Assigned to the INS-FX [INTENSITY] knob is the specific parameter
that is best suited for adjustment with the knob. The parameter
assigned is predetermined for the selected effect type.
that is best suited for adjustment with the knob. The parameter
assigned is predetermined for the selected effect type.
fig.03-07a
Rotate [INTENSITY] while [INS-FX] is lit to change the amount of
the effect applied.
the effect applied.
The functions of parameters that may be set differs according to
the effect selected with the effect type. For more details, refer to
the effect selected with the effect type. For more details, refer to
After adjusting the effect with [INTENSITY], the knob’s settings are
saved when you press [WRITE] and carry out the write procedure.
saved when you press [WRITE] and carry out the write procedure.
Using the FX/SYSTEM Knob and
[VALUE ▼/▲]
[VALUE ▼/▲]
1.
Confirm that the SH-32 is in Patch mode.
2.
Turn the FX/SYSTEM knob to the parameter to be set; select
“COLOR,” “RATE (DEPTH),” or “LEVEL.”
fig.03-08
The functions of parameters that may be set differs according to
the effect selected with the effect type. For more details, refer to
the effect selected with the effect type. For more details, refer to
3.
Press [VALUE
▼
/
▲
] to select a value.
You can make settings for the selected parameter only when the
indicator to the left of the FX/SYSTEM knob is blinking.
indicator to the left of the FX/SYSTEM knob is blinking.
4.
When you finish making settings, press [EXIT] to end the
procedure.
5.
To save the settings, press [WRITE] and carry out the write
Using the Reverb/Delay
(REV/DELAY)
This section explains the procedures used when working with
Reverb/Delay.
Reverb/Delay.
Turning the Reverb/Delay On and
Off
You can set whether Reverb/Delay are used (switched on), or not
used (switched off) in each Patch, Rhythm Set, or Performance. Turn
these settings OFF when you wish to listen to the unprocessed sound
as you create a sound, or when you wish to use external effects
processors instead of the built-in effects.
used (switched off) in each Patch, Rhythm Set, or Performance. Turn
these settings OFF when you wish to listen to the unprocessed sound
as you create a sound, or when you wish to use external effects
processors instead of the built-in effects.
In Part Assign mode (p. 71), the following procedure switches
each Part on and off, and the Reverb/Delay for the selected parts
is switched on or off. In addition, you can turn the individual
Rhythm Tones (percussion instruments) in Rhythm Tone Edit (p.
69) on and off.
each Part on and off, and the Reverb/Delay for the selected parts
is switched on or off. In addition, you can turn the individual
Rhythm Tones (percussion instruments) in Rhythm Tone Edit (p.
69) on and off.
1.
Press [REV/DELAY], to switch the effect on or off.
The effect is on when the indicator is lit, and off when the
indicator light is off.
indicator light is off.
fig.03-03
2.
To save the settings, press [WRITE] and carry out the write
Selecting the Reverb/Delay Type
(TYPE)
The SH-32 features 10 different types of internal Reverb/Delay
effects; you can select the effect type for each individual Patch or
Rhythm Set.
effects; you can select the effect type for each individual Patch or
Rhythm Set.
1.
Confirm that the SH-32 is in Patch mode.
2.
Rotate the FX/SYSTEM knob to “TYPE” in the “REV/DELAY”
section.
fig.03-04.e
3.
Press [VALUE
▼
/
▲
] to select which of the effects you want
to use.
4.
When you finish making settings, press [EXIT] to end the
procedure.
5.
To save the settings, press [WRITE] and carry out the write
blinking