Roland RG-3M 用户手册

 

704 (edit)

 

• When connecting USB memory, make sure to press it until 

it is fully inserted.

 

705 (edit)

 

• Never touch the terminals of the USB memory. Also, 

avoid getting the terminals dirty.

 

708

 

• USB memory is constructed using precision components; 

handle the cards carefully, paying particular note to the 
following.

• To prevent damage to the USB memory from static 

electricity, be sure to discharge any static electricity 
from your own body before handling the USB 
memory.

• Do not touch or allow metal to come into contact with 

the contact portion of the USB memory.

• Do not bend, drop, or subject USB memory to strong 

shock or vibration.

• Do not keep USB memory in direct sunlight, in closed 

vehicles, or other such locations (storage temperature: 
0 to 50 ˚C).

• Do not allow USB memory to become wet.
• Do not disassemble or modify the USB memory.

 

Add

 

• Insert the USB memory in the Ext Memory port evenly 

and without undue force. Forcing the USB memory may 
damage the Ext Memory port.

 

Add

 

• Do not insert any object other than the USB memory (e.g., 

wires, coins, other types of disks, etc.) in the Ext Memory 
port. This may damage the Ext Memory port.

 

Add

 

• Do not subject the Ext Memory port cover or connected 

USB memory to excessive stress.

 

Add

 

• Close the USB memory cover when using the USB 

memory for extended periods.

 

Add

 

• Avoid using the unit immediately after it has been moved 

to a location with a level of humidity that is greatly 
different than its former location. Rapid changes in the 
environment can cause condensation to form inside the 
drive, which will adversely affect the operation of the 
drive and/or damage discs. When the unit has been 
moved, allow it to become accustomed to the new 
environment (allow a few hours) before operating it.

 

Add

 

• Remove any disc from the drive before powering up or 

down.

 

Add

 

• To avoid the risk of malfunction and/or damage, insert 

only discs with into the CD drive. Never insert any other 
type of disc. Avoid getting paper clips, coins, or any other 
foreign objects inside the drive.

 

Add

 

• Do not subject to vibrations or physical shock during use, 

and do not move the unit while the power is turned on.

 

Add

 

• The pickup is of dust-resistant construction. Do not use 

pickup cleaners or other such materials, as they may 
damage the pickup.

 

Add

 

• When handling the discs, please observe the following.

• Do not touch the encoded surface of the disc.
• Do not use in dusty areas.
• Do not leave the disc in direct sunlight or an enclosed 

vehicle.

 

801

 

• Avoid touching or scratching the shiny underside 

(encoded surface) of the disc. Damaged or dirty CD-ROM 
discs may not be read properly. Keep your discs clean 
using a commercially available CD cleaner.

 

Add

 

• Keep the disc in the case.

 

Add

 

• Do not keep the disc in the CD drive for a long time.

 

Add

 

• Do not put a sticker on the label of the disc.

 

Add

 

• Wipe the disc with a soft and dry cloth radially from 

inside to outside. Do not wipe along circumference.

 

Add

 

• Do not use benzine, record cleaner spray or solvents of 

any kind.

 

Add

 

• Do not bend the disc. Bending discs may prevent proper 

reading and writing of data, and may further result in 
malfunction.

203

* GS (

) is a registered trademark of Roland 

Corporation.

209

* Mac OS is a trademark of Apple Computer, Inc.

Add

* XG lite (

) is a registered trademark of Yamaha 

Corporation.

Add

* This device in part makes use of Independent JPEG 

Group software.

220

* All product names mentioned in this document are 

trademarks or registered trademarks of their 
respective owners.

RG-3M_e3.book 8 ページ ２００８年３月２５日　火曜日　午前１０時１分