Roland DP90 用户手册

It’s easy to record your own performances.
You can play back a recorded performance to check your playing, or perform along with a recorded performance.
The unit lets you record in the following ways.

Parts will be separate.
You can re-record a specific portion of the song.
You can overdub.

*  Normally, you should use SMF recording.

Your performance will be recorded as audio data. The recorded song can be used on your computer.

*  In order to use audio recording, you must connect a USB flash drive (sold separately) to the USB memory port (p. 10).

*  SMFs (Standard MIDI Files) use a standard format for music file that was formulated so that files containing music file could be widely compatible, 

regardless of the manufacturer of the listening device. An enormous variety of music is available, whether it be for listening, for practicing musical 

instruments, for Karaoke, etc.

To record a new song, proceed as follows.
This method is convenient when you simply want to record your performance as easily as possible.

Select the tone that you want to use for performing (p . 14) .

The [ 

 ] (Rec) button will light, the [ 

 ] (Play/Stop) button will blink, and the unit will enter 

recording-standby mode.
If you decide not to record, press the [ 

 ] (Rec) button once again.

If desired, sound the metronome (p . 22) .

If you change the metronome’s tempo and time signature, they will be recorded with the song, allowing the metronome to sound correctly during 

playback.

A two-measure count will be heard (the measure number will be shown as “-2” 

then “-1” in the lower right of the display), and then recording will start.
When recording starts, the [ 

 ] (Rec) button and [ 

 ] (Play/Stop) button 

will light.

You can also initiate recording by simply playing the keyboard. If you initiate recording by playing the keyboard, a count will not be sounded.

Recording will stop, and a message will ask whether you want to save your performance.