Roland V-Piano 用户手册

下载
页码 116
 
104
 
Error Messages
 
Indication:
Situation:
Action:
 
01 
You can only read the music file.
You can only read the music file. It 
can not be saved.
02 
An error occurred during writing.
An error occurred during writing.
10 
No storage media is inserted.
No external media is inserted.
Insert the external media and try again.
11 
Insufficient free memory at the 
save destination.
There is not enough free memory 
in the save destination.
Either use different external media, or delete unneeded files before you try 
the operation again.
14 
An error occurred during reading.
An error occurred during reading. 
The external media may be 
corrupted.
15 
The data format is not compatible 
with this instrument.
The file is unreadable. The data 
format is not compatible with the 
V-Piano.
Only files in the following formats can be used.
Setup files with an extension of “vsu”
SMF music files with an extension of “mid”
16 
Data could not be read fast enough 
for playback of the song.
Data was not called up in time for 
playback of the song.
You may be able to play the song after waiting a few seconds.
18 
The audio data format is not 
compatible with this instrument.
The audio data format is not 
compatible with this instrument.
30 
The internal memory capacity of 
the V-Piano is full.
The internal memory capacity of 
the V-Piano is full.
40 
The instrument can’t deal with the 
excessive MIDI data.
The V-Piano cannot deal with the 
excessive MIDI data sent from the 
external MIDI device.
Reduce the amount of MIDI data sent to the V-Piano.
41 
A MIDI cable has been 
disconnected.
A MIDI cable has been 
disconnected.
Connect it properly and securely.
43 
A MIDI transmission error has 
occurred.
A MIDI transmission error has 
occurred.
Check the MIDI cable and connected MIDI device.
51 
System error. Repeat procedure, or 
power off, then on.
There may be a problem with the 
system.
Repeat the procedure from the beginning. If it is not solved after you have 
tried several times, contact a Roland service center.
65 
The USB Memory port was 
subjected to excessive current.
The USB memory connector was 
subjected to excessive current.
Make sure that there is no problem with the USB memory, then turn the 
power off, then on again.
V-Piano_e.book 104 ページ 2009年1月28日 水曜日 午前9時10分