Roland V-Piano 用户手册
26
Getting ready
4.
Use screws (4 x 16 mm) to attach the CD drive to the holes located on the V-Piano’s bottom panel, as shown in the
illustration.
* You must use only the screws (4 x 16 mm) that were included with the CD-01A.
fig.CDDmount.eps
5.
Use a USB cable to connect the CD drive’s USB connector to the V-Piano’s front panel USB memory connector.
The USB cable included with the V-Piano can be routed past the V-Piano’s back panel and connected.
fig.CDD-USB.eps
6.
Connect the AC adaptor included with the CD drive to the CD drive’s DC IN connector.
fig.CDD-PSB.eps
Secure the AC adaptor cord to the cord hook as shown in the illustration. This will prevent accidental disconnection of the
cord and loss of power or excessive strain on the AC adaptor jack if the cord is pulled inadvertently.
7.
Connect the AC adaptor to an AC outlet.
Screws (4 x 16 mm)
USB Cable
To USB memory
connector
connector
To AC outlet
Power cord
Cord hook
AC adaptor
Place the AC adaptor so the side with the indicator faces upwards and
the side with textual information faces downwards.
The indicator will light when you plug the AC adaptor into an AC outlet.
the side with textual information faces downwards.
The indicator will light when you plug the AC adaptor into an AC outlet.
V-Piano_e.book 26 ページ ２００９年１月２８日 水曜日 午前９時１０分