Roland MC-09 用户手册

If you perform an incorrect operation or if the data could not be processed as you specified, an error 
message will be displayed. Refer to the explanation for the error message that appears, and take 
the appropriate action.

 

A large number of MIDI messages were received all at 
once, and processing could not be completed.

Reduce the amount of data that is being transmitted.

There is a problem with the MIDI cable connection.

Check whether the MIDI cable is broken or disconnect-
ed.

The checksum value of a received exclusive message is 
incorrect.

Correct the checksum value.

The format of a received exclusive message is incorrect.

Check the data that is being transmitted, and perform 
the operation once again. Also check whether a MIDI 
cable is disconnected or broken.

It is possible that the contents of internal memory have 
been damaged.

Try performing the Factory Reset operation. If this does 
not resolve the problem, contact a Roland service cen-
ter.

The specified file does not exist on the memory card.

Specify the file number of an existing file.

The file has an incorrect data format, or has been dam-
aged.

Specify a file of the correct data format.

There is insufficient space on the memory card.

Delete unneeded files to create free space on the mem-
ory card.

The memory card is write-protected.

Remove the write protect label.

The memory card is not inserted.

Insert the memory card correctly.

The memory card is not formatted.

Format the card on the MC-09.

The MC-09 does not support this memory card.

Use a memory card that the MC-09 supports.

The memory card is damaged.

Replace it with a correctly-functioning memory card.