Roland FC-300 用户手册

 

This is the mode for sending Control Change messages.

In this mode, all the pedals can be used to send Control Change messages. You 
should use this mode at times when you want to send a lot of Control Change 
messages.

You can also store up to five sets, or configurations, of settings for all of the pedals 
within the FC-300’s memory. Called pedal settings, these configurations can be 
switched as needed (p. 26).

Pressing the various pedals transmits the Control Change messages set for the 
respective pedal over the selected MIDI channel.

Control Change messages with the controller numbers set for each pedal are 
transmitted.

Each pedal is set at the factory as shown below.

These switch the number pedal functions.

 

1

65

0–127

LATCH

6

70

0–127

LATCH

2

66

0–127

LATCH

7

71

0–127

LATCH

3

67

0–127

LATCH

8

72

0–127

LATCH

4

68

0–127

LATCH

9

73

0–127

LATCH

5

69

0–127

LATCH

10

74

0–127

LATCH

 

[

]

This sets the number pedals to function as pedals 1–5.

[

]

This sets the number pedals to function as pedals 6–10.

Pedal Setting Number

For details about the all 
parameters and changes the 
setting, refer to “Change the 
Pedal Settings”

When the [

] pedal is pressed, the [

] pedal’s indicator lights, and the functions 

for number pedals 1–5 become operable.

When the [

] pedal is pressed, the [

] pedal’s indicator lights, and the functions 

for number pedals 6–10 become operable.

FC-300_e1.book 21 ページ ２００７年４月２４日　火曜日　午前１０時１０分