Roland FC-300 用户手册
44
Patch Mode
4
When you have finished with the editing, press [EXIT].
The top screen appears.
5
1
In the Patch mode’s top screen, press PARAMETER [
].
2
Press PARAMETER [
] [
] to select “Patch Name.”
3
Press PARAMETER [
] to move the cursor, and press VALUE [
] [
] to
enter the characters.
To store patches you have created in memory, carry out the Write procedure.
1
In the Patch mode’s top screen, press [WRITE].
2
Press VALUE [
] [
] to select the save-destination patch number, then
press [WRITE].
3
“Sure?” appears in the display; press [WRITE] once more.
The set value is saved, and the FC-300 returns to the top screen.
Set the Patch Name
Storing (Saving) Patches
The settings made for the
pedals are lost when the patch
is switched. To save settings
made for the pedals, save them
as a patch. For more detailed
information, see “Storing
(Saving) Patches”
pedals are lost when the patch
is switched. To save settings
made for the pedals, save them
as a patch. For more detailed
information, see “Storing
(Saving) Patches”
Patch names can be up to 12
characters in length.
characters in length.
When you press [INS], inserts
a blank space at the cursor
location. When you press
[DEL], deletes a character at
the cursor location.
a blank space at the cursor
location. When you press
[DEL], deletes a character at
the cursor location.
Patch names are indicated in
the top screen in Patch Mode.
the top screen in Patch Mode.
FC-300_e1.book 44 ページ ２００７年４月２４日 火曜日 午前１０時１０分