Roland FC-300 用户手册
8
Introduction
1
PARAMETER button [
] [
]
Press these to select parameters.
2
UTILITY button / INS (insert) button
Press this when changing system settings. In the Edit screen, this is used to insert
MIDI messages and blank spaces.
MIDI messages and blank spaces.
3
MODE button / DEL (delete) button
Press this to change the FC-300’s operating mode. In the Edit screen, this is used to
delete a MIDI message or a character at the cursor location.
delete a MIDI message or a character at the cursor location.
4
VALUE button [
] [
]
Use this when changing the values of settings.
5
EXIT button
Press this to undo an operation and return to the previous screen.
6
WRITE button
Press this to store settings and execute procedures.
Top Panel (Buttons)
1
2 3
4
6
5
To jump to the main
parameters, hold down one of
these buttons while you press
the other. With items for which
there aren’t that many
parameters, the FC-300 jumps
to the last (or initial)
parameter.
parameters, hold down one of
these buttons while you press
the other. With items for which
there aren’t that many
parameters, the FC-300 jumps
to the last (or initial)
parameter.
• By continuing to hold down
VALUE for a number of
seconds, the value of the
setting can be increased/
decreased continuously.
seconds, the value of the
setting can be increased/
decreased continuously.
• The value will increase
rapidly if you hold down
VALUE [
], then press
and hold VALUE [
].
• The value will decrease
rapidly if you hold down
VALUE [
], then press
and hold [
].
FC-300_e1.book 8 ページ 2007年4月24日 火曜日 午前10時10分