Yamaha 007POTO-G0 用户手册
Rear panel
24
LS9-16/32 Owner’s Manual
1
INPUT jacks 1–16 {1–32}
These are balanced XLR-3-31 female input jacks for inputting analog
audio signals from line level devices or microphones. The nominal
input level is -62 dBu – +10 dBu. Resettable head amps are provided
on all jacks, and head amp settings can be stored in scene memory.
audio signals from line level devices or microphones. The nominal
input level is -62 dBu – +10 dBu. Resettable head amps are provided
on all jacks, and head amp settings can be stored in scene memory.
B
OMNI OUT jacks 1–8 {1–16}
These are XLR-3-32 male output jacks for outputting ana-
log audio signals. These are used mainly to output MIX/
MATRIX channel signals. The nominal output level is +4
dBu.
log audio signals. These are used mainly to output MIX/
MATRIX channel signals. The nominal output level is +4
dBu.
C
Slots {1–2}
Separately sold mini-YGDAI I/O cards can be installed in
these slots to provide additional input/output ports. The
LS9-16 has one slot, and the LS9-32 has two slots. Each
slot can input/output a maximum of 16 channels of sig-
nals.
these slots to provide additional input/output ports. The
LS9-16 has one slot, and the LS9-32 has two slots. Each
slot can input/output a maximum of 16 channels of sig-
nals.
LS9-16
LS9-32
Male XLR plug
1 (ground)
3 (cold)
2 (hot)
LS9-16
LS9-32
Female XLR plug
1 (ground)
3 (cold)
2 (hot)
• The nominal output level of OMNI OUT jacks 1–8 {1–16} is +4 dBu
(maximum level is +24 dBu), but if necessary this can be changed
by an internal switch to -2 dBu (maximum level is +18 dBu). (A fee
will be charged for this change.) For details, contact to your
Yamaha dealer listed at the end of this manual.
by an internal switch to -2 dBu (maximum level is +18 dBu). (A fee
will be charged for this change.) For details, contact to your
Yamaha dealer listed at the end of this manual.
NOTE
LS9-16
LS9-32