Roland 5100011346 -01 用户手册
56
Using the SD-50 as an Audio Interface
1.
Use a USB cable to connect the SD-50 to your computer.
2.
Play back an audio file (e.g., WAV or MP3) on your computer.
The playback of your computer will be heard from the SD-50.
If you connect a microphone or guitar to the SD-50, you’ll be able to record a vocal or guitar performance into the
computer.
computer.
Connect your microphone or guitar
1.
Use a USB cable to connect the SD-50 to your computer.
2.
Set the [SETTING] switch to the appropriate position.
Set the [SETTING] switch as appropriate for the jack or device you’re connecting.
3.
Connect your microphone or guitar to the MIC IN jack or the MIC/GUITAR IN jack.
Connect a microphone to the MIC IN jack or MIC/GUITAR IN jack. Connect a guitar to the MIC/GUITAR IN jack.
* You can’t use both the MIC/GUITAR IN and MIC IN jacks simultaneously.
You can apply echo to the microphone (p. 59).
Listening to Playback from Your Computer
Recording Your Microphone or Guitar
Getting Ready to Record
Connected device
Connected jack
Setting
Nominal input level
Guitar
MIC/GUITAR IN jack
GUITAR (Hi-Z)
-30– -10 dBu
Dynamic microphone
(phantom power not required)
(phantom power not required)
MIC/GUITAR IN jack
MIC
-50– -30 dBu
MIC IN jack
MIC
-50– -30 dBu
Condenser microphone
(phantom power required)
(phantom power required)
MIC IN jack
MIC (DC 48 V 10 mA)
-50– -30 dBu
SD-50_e.book 56 ページ ２０１０年１月２５日 月曜日 午前１０時５２分