Roland 5100011346 -01 用户手册

Using the SD-50 as an SMF/Audio Player

When playing back a song, you can use these functions to mute the specified part(s) so that you can perform it
yourself, or minimize the melodic portion so that you can perform it.

If you’ve connected a microphone or guitar, you can use the SD-50 to play back an accompaniment while
you perform on vocals or guitar.

Press the [MINUS ONE] (CENTER CANCEL) button so it’s lit.

The minus-one or center cancel function will turn on.

When you play back a song, the following will occur depending on the file type of the song.

Press the [MINUS ONE] (CENTER CANCEL) button once again.

The [MINUS ONE] (CENTER CANCEL) button will go out, and the minus-one or center cancel function will be turned
off.

The center cancel function can also be applied to audio being input via the LINE IN jack (p. 55).

Changing the Minus-One part

Press the [MENU] button.

The menu screen will appear.

Turn the [VALUE] dial to select “Minus One,” and then press the [ENTER] button.

Turn the [VALUE] dial to change the setting.

Using Minus-One and Center Cancel (MINUS ONE/CENTER CANCEL)

File type

Function

Explanation

SMF

Minus One

The sound of the specified part(s) will be muted.

Audio file

Center Cancel

Sounds in the center (the melodic portion of the sound) will be reduced.

Value

Explanation

PART 1–PART16,
4&5, 1&4&5,
EXCEPT 10,
EXCEPT 2&10

The part(s) for which this setting is ON will be muted.
PART 1–PART16: The specified part from 1 through 16 will be muted.
4&5: Parts 4 and 5 will be muted.
1&4&5: Parts 1, 4, and 5 will be muted.
EXCEPT 10:

All parts except part 10 will be muted.
Normally, only the drum sound will be heard.

EXCEPT 2&10: All parts except parts 2 and 10 will be muted.

SD-50_e.book 69 ページ２０１０年１月２５日　月曜日　午前１０時５２分