Roland 04672434 用户手册
145
SYSTEM Chapter 8 Parameter Guide
Chapter 8
LCD CONTRAST
DIRECT PATCH
GK SETTING
SYSTEM
Parameter/
Range
Range
Explanation
CONTRAST
1–50
Setting up the VB-99 in certain positions
may make the display difficult to read. If
this occurs, adjust the display contrast (legi-
bility).
may make the display difficult to read. If
this occurs, adjust the display contrast (legi-
bility).
Parameter/
Range
Range
Explanation
DIRECT PATCH
DIR.PATCH 1–5
This sets the desired [DIRECT PATCH 1]–
[DIRECT PATCH 5].
[DIRECT PATCH 5].
Parameter/
Range
Range
Explanation
GK CONNCT (GK Connect)
AUTO
This automatically determines the GK con-
nection and switches the internal settings.
When the GK connection is in use, the BASS
INPUT connection is disabled.
nection and switches the internal settings.
When the GK connection is in use, the BASS
INPUT connection is disabled.
OFF
Use this setting if you normally use the con-
nection for BASS INPUT.
nection for BASS INPUT.
ON
Use this setting if you are normally using a
GK connection.
GK connection.
GK FUNC (GK Function)
GK VOL (GK Volume)
GK VOL (GK Volume)
This selects the function assigned to GK VOL.
For more on the functions assigned, refer to the GK
VOL column in
VOL column in
GK S1, S2 (GK S1, S2 Switch)
This selects the functions assigned to GK S1, S2.
For more on the functions assigned, refer to the GK S1,
S2 column in
S2 column in
Parameter/
Range
Range
Explanation
SET MODE
This setting allows you to select whether one GK SETTING is used
globally for the entire VB-99 or if different GK SETTINGS are speci-
fied for each patch individually.
globally for the entire VB-99 or if different GK SETTINGS are speci-
fied for each patch individually.
SYSTEM
The GK SETTING set here is used globally
for the entire VB-99. This is the default facto-
ry setting.
for the entire VB-99. This is the default facto-
ry setting.
PATCH
GK SETTINGS are specified for each patch
individually. Carry out the Write procedure
after making changes to the settings in each
patch. Use this setting when performing
with multiple basses, switching the instru-
ment depending on the patch used.
individually. Carry out the Write procedure
after making changes to the settings in each
patch. Use this setting when performing
with multiple basses, switching the instru-
ment depending on the patch used.
SETTING1–10
1–10
This selects the GK SETTING to be set.
NAME
This sets the name for the GK SETTING (up to eight characters).
INSERT
Insert a space at the cursor location.
DELETE
Delete a character. The characters that fol-
low get shifted to the left.
low get shifted to the left.
SPACE
Input a space at the cursor location.
A0!
Switch between uppercase letters, numbers,
and characters.
and characters.
A<=>a
Switch between uppercase letters and low-
ercase letters.
ercase letters.
GK PU TYPE (GK Pickup Type)
GK-3B
Specifies the GK-3B.
GK-2B
Specifies the GK-2B.
PIEZO
This is suited to piezo pickups that have a
flat response.
flat response.
PIEZO G
This is suited to piezo pickups made by
Graph Tech Guitar Labs.
Graph Tech Guitar Labs.
PIEZO R
This is suited to piezo pickups made by
RMC Pickup Co.
RMC Pickup Co.
PIEZO TONE LOW *1
-10–+10
Adjusts the low frequency range tone.
PIEZO TONE HIGH *1
-10–+10
Adjusts the high frequency range tone.
BASS SCALE
710–940mm,
SHORT (760mm),
MEDIUM(812mm),
LONG JB/PB (864mm),
EXTRA LONG (914mm)
SHORT (760mm),
MEDIUM(812mm),
LONG JB/PB (864mm),
EXTRA LONG (914mm)
This sets the scale length for your bass.
VB-99_e.book 145 ページ ２００８年８月１８日 月曜日 午後１時１０分