Roland 04672434 用户手册

  

Model Name :

Type of Equipment :

Responsible Party :

Address :

Telephone :

VB-99
V-Bass System
Roland Corporation U.S.
5100 S.Eastern Avenue, Los Angeles, CA 90040-2938
(323) 890-3700

  

This product complies with the requirements of EMC Directive 2004/108/EC.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du  Canada.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the 
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee 
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:

–   Reorient or relocate the receiving antenna.
–   Increase the separation between the equipment and receiver.
–   Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–   Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
 (1) this device may not cause harmful interference, and
 (2) this device must accept any interference received, including interference that may cause undesired operation.

Unauthorized changes or modification to this system can void the users authority to operate this equipment.
This equipment requires shielded interface cables in order to meet FCC class B Limit.

  

This product contains chemicals known to cause cancer, birth defects and other reproductive harm, including lead.

 

002c

 

• Do not open (or modify in any way) the unit or its 

AC adaptor.

...........................................................................................................

 

003

 

• Do not attempt to repair the unit, or replace parts 

within it (except when this manual provides 
specific instructions directing you to do so). Refer 
all servicing to your retailer, the nearest Roland 
Service Center, or an authorized Roland 
distributor, as listed on the “Information” page.

...........................................................................................................

 

004

 

• Never install the unit in any of the following 

locations.

• Subject to temperature extremes (e.g., direct 

sunlight in an enclosed vehicle, near a heating 
duct, on top of heat-generating equipment); or 
are

• Damp (e.g., baths, washrooms, on wet floors); 

or are

• Exposed to steam or smoke; or are

• Subject to salt exposure; or are

• Humid; or are

• Exposed to rain; or are

• Dusty or sandy; or are

• Subject to high levels of vibration and shakiness.

...........................................................................................................

 

005

 

• This unit should be used only with a rack-mount 

adaptor (RAD-99) or stand (PDS-10) that is 
recommended by Roland. (p. 93)

...........................................................................................................

 

006

 

• When using the unit with a stand (PDS-10) recom-

mended by Roland, the stand must be carefully 
placed so it is level and sure to remain stable. If 
not using a stand, you still need to make sure that 
any location you choose for placing the unit 
provides a level surface that will properly support 
the unit, and keep it from wobbling.

...........................................................................................................

 

008c

 

• Be sure to use only the AC adaptor supplied with 

the unit. Also, make sure the line voltage at the 
installation matches the input voltage specified on 
the AC adaptor’s body. Other AC adaptors may 
use a different polarity, or be designed for a 
different voltage, so their use could result in 
damage, malfunction, or electric shock.

..........................................................................................................

 

008d

 

• Connect only the specified device (FC-300) to the 

RRC2 IN connector (which provide a supply of 
power).

..........................................................................................................

 

008e

 

• Use only the attached power-supply cord. Also, 

the supplied power cord must not be used with 
any other device.

..........................................................................................................

 

009

 

• Do not excessively twist or bend the power cord, 

nor place heavy objects on it. Doing so can 
damage the cord, producing severed elements 
and short circuits. Damaged cords are fire and 
shock hazards!

..........................................................................................................

 

010

 

• This unit, either alone or in combination with an 

amplifier and headphones or speakers, may be 
capable of producing sound levels that could 
cause permanent hearing loss. Do not operate for 
a long period of time at a high volume level, or at 
a level that is uncomfortable. If you experience 
any hearing loss or ringing in the ears, you should 
immediately stop using the unit, and consult an 
audiologist.

..........................................................................................................

 

011

 

• Do not allow any objects (e.g., flammable 

material, coins, pins); or liquids of any kind 
(water, soft drinks, etc.) to penetrate the unit.

..........................................................................................................

Used for instructions intended to alert 
the user to the risk of injury or material 
damage should the unit be used 
improperly. 

* Material damage refers to damage or 

other adverse effects caused with 
respect to the home and all its 
furnishings, as well to domestic 
animals or pets. 

Used for instructions intended to alert 
the user to the risk of death or severe 
injury should the unit be used 
improperly. 

The 

●

 symbol alerts the user to things that must be 

carried out. The specific thing that must be done is 
indicated by the design contained within the circle. In 
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet. 

The      symbol alerts the user to important instructions 
or warnings.The specific meaning of the symbol is 
determined by the design contained within the 
triangle. In the case of the symbol at left, it is used for 
general cautions, warnings, or alerts to danger. 

The       symbol alerts the user to items that must never 
be carried out (are forbidden). The specific thing that 
must not be done is indicated by the design contained 
within the circle. In the case of the symbol at left, it 
means that the unit must never be disassembled. 

  

IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.

BLUE: 
BROWN: 

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying 
the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
Under no circumstances must either of the above wires be connected to the earth terminal of a three pin plug.

NEUTRAL
LIVE

 

204

 

* Microsoft and Windows are registered trademarks of Microsoft Corporation.

* Windows Vista is a trademark of Microsoft Corporation.

 

206j

 

* Windows

 

®

 

 is known officially as: “Microsoft

 

®

 

 Windows

 

®

 

 operating system.”

 

207

 

* Apple and Macintosh are registered trademarks of Apple Inc.

 

209

 

* Mac OS is a trademark of Apple Inc.

 

213

 

* Pentium and Celeron are registered trademarks of Intel Corporation.

* PowerPC is a registered trademark of International Business Machines Corporation.

 

220

 

* All product names mentioned in this document are trademarks or registered trademarks of their respective owners.