Roland 04672434 用户手册
25
Chapter 1 Outputting Sounds
Chapter 1
You can switch patches consecutively with the PATCH/VALUE
Dial.
Dial.
1.
Confirm that the Play screen is displayed.
If a screen other than the Play screen is shown, press [EXIT]
several times until the Play screen appears.
several times until the Play screen appears.
2.
Rotate the PATCH/VALUE dial to switch the
patches.
patches.
fig.01-190
Turn the dial to the right (clockwise) to switch to the next
patch number, or to the left (counterclockwise) to switch to the
previous patch number.
patch number, or to the left (counterclockwise) to switch to the
previous patch number.
1.
Confirm the following before turning off the
power.
power.
• Are the volume levels for the VB-99 and connected amp and
other devices turned down completely?
2.
Turn off the power to the bass amp (power
amp).
amp).
3.
Press [POWER] to turn off the VB-99’s power.
fig.01-190
Switching with the PATCH/
VALUE Dial
VALUE Dial
2
Turning Off the Power
3
The message “NOW SHUTDOWN...” appears when
the power is switched off. The VB-99’s current
settings are saved to memory at this time. Do not
disconnect the AC adaptor until this message is no
longer displayed.
the power is switched off. The VB-99’s current
settings are saved to memory at this time. Do not
disconnect the AC adaptor until this message is no
longer displayed.
VB-99_e.book 25 ページ ２００８年８月１８日 月曜日 午後１時１０分