Roland 04672434 用户手册

下载
页码 184
 
30
Chapter 2 Creating Sounds
 
1.
 
Press [NAME/KEY/BPM].
 
2.
 
Press [F2] (KEY).
 
3.
 
Set the song’s key with [F1] (SELECT) or the 
F1 knob.
 
*
The COSM bass PITCH SHIFT, HARMO, and BEND settings and 
the HARMONIST effect operate according to the key you set here.
 
4.
 
If you want to save the edited settings, 
perform the Write procedure (p. 34).
 
*
If you do not want to save, press [EXIT] to return to the Play screen.
 
It is possible to combine the sound of the COSM basses and the 
normal bass pickups at the same time.
 
1.
 
Press [COSM BASS].
 
2.
 
Set the COSM BASS SW to ON with [F1] or 
with the F1 knob.
 
The sounds from the normal pickup and COSM bass are 
not played when COSM BASS SW is set to OFF.
 
3.
 
Press PAGE [
] several times to move to the 
screen for setting the volume balance.
 
4.
 
Use the F1 and F2 knobs to set the balance 
between the COSM bass sound and the 
normal pickup sound.
 
F1 Knob
 
Adjusts the COSM bass’s volume level. When POLY FX is set 
to ON, it adjusts the volume level of the signal after it has 
passed through POLY FX.
 
F2 Knob
 
This adjusts the volume of the normal pickup.
When the COSM bass is connected in CHAIN at a point other 
than the beginning of the effects chain, you can adjust the 
volume of the sounds that have passed though effects from 
the beginning of the chain up to the point where the bass is 
connected.
 
5.
 
If you want to save the edited settings, 
perform the Write procedure (p. 34).
 
*
If you do not want to save, press [EXIT] to return to the Play screen.
 
Setting the Key
 
Mixing the Normal Pickup 
Sound with the GK Input
 
Setting the Volume Balance
VB-99_e.book 30 ページ 2008年8月18日 月曜日 午後1時10分