Roland 04672434 用户手册
52
Chapter 5 Using MIDI
Bank Select and Program Change are MIDI messages generally used
for switching patches.
for switching patches.
Normally, patches are switched using Program Change messages.
However, if Program Changes alone are used, you’ll only be able to
select up to a maximum of 128 different patches. Because of this,
some devices also employ the Bank Select, expanding the number of
selectable patches.
However, if Program Changes alone are used, you’ll only be able to
select up to a maximum of 128 different patches. Because of this,
some devices also employ the Bank Select, expanding the number of
selectable patches.
Patches for these devices are assigned numbers combining Bank
Select MSB, LSB numbers 0–127 and Program numbers 1–128.
Select MSB, LSB numbers 0–127 and Program numbers 1–128.
*
The VB-99 disregards the Bank Select LSB.
This section describes the VB-99’s MIDI-related functions. Set these
according to how they are to be used.
according to how they are to be used.
1.
Press [SYSTEM].
The System screen appears.
2.
Press PAGE [
] to display Page 1.
3.
Press [F6] (MIDI).
The MIDI settings screen appears.
The following section describes the settings
used with MIDI.
used with MIDI.
MIDI Channel
This sets the channel used for transmitting and receiving MIDI
messages corresponding to the VB-99’s patches and operations.
messages corresponding to the VB-99’s patches and operations.
1.
2.
Press PAGE [
] to display Page 1.
3.
Rotate the F1 knob to set the MIDI channel (1–
16).
16).
Be sure not to set the same MIDI channel as the channel
used for the BASS TO MIDI or V-LINK functions.
used for the BASS TO MIDI or V-LINK functions.
Bank Select and Program Change
Setting the MIDI-Related
Functions
Functions
VB-99_e.book 52 ページ ２００８年８月１８日 月曜日 午後１時１０分