Roland 04672434 用户手册
75
Chapter 7 Other Functions
Chapter 7
You can press the D BEAM or RIBBON CONTROLLER [FILTER]
button to apply the FILTER effect and add nuance to the tone in
Channel A or B, or both channels.
button to apply the FILTER effect and add nuance to the tone in
Channel A or B, or both channels.
1.
Press [CONTROL ASSIGN]
2.
Press PAGE [
] [
] to go to Page 2 for the D
Beam, or Page 3 for the ribbon controller.
3.
Press [F2] (FILTER).
4.
Press PAGE [
] to go to Page 1.
The D BEAM FILTER or the RIBBON FILTER screen appears.
5.
Use [F1] (SELECT) or the F1 knob to select the
channel to which you want the effect to be
applied.
channel to which you want the effect to be
applied.
6.
Set each of the FILTER parameters on Page 1.
For more detailed information on the parameters that can be set,
refer to
refer to
7.
Press [EXIT] several times to return to the Play
screen.
screen.
8.
Press the D BEAM or RIBBON CONTROLLER
[FILTER] button, causing the indicator to light.
[FILTER] button, causing the indicator to light.
9.
Use the D Beam or ribbon controller to apply
the filter and add nuance to the sound.
the filter and add nuance to the sound.
*
With D BEAM:FILTER:SW or RIBBON:FILTER:SW and D
BEAM:FILTER:CONTROL and RIBBON:FILTER:CONTROL set
as the target in Control Assign, you can control
FILTER:CONTROL using an external pedal, MIDI device, or any
of a variety of other controllers.
Adding Nuance to the Sound
(FILTER)
(FILTER)
VB-99_e.book 75 ページ ２００８年８月１８日 月曜日 午後１時１０分