Roland 04672434 用户手册

 

F1: SOURCE (ASSIGN1–16 only)

This selects the controller assigned to the function.

F3: SW (ON/OFF)

Setting this to ON enables the controller.

F4–F6: TARGET PARAMETER

Use these to select the parameter you want to assign.

You can quickly locate and select the desired parameter by first 
narrowing down the parameter type with F4, then using F5 and 
then F6 to reach the right parameter.

 

For more details on the parameters, refer to 

 

 

F2: MIN

This sets the minimum value for the target’s controllable range.

F3: MAX

This sets the maximum value for the target’s controllable range.

F4: SW MODE (only when a switch type controller is selected for 

SOURCE)

This specifies how the switches function.

F4: MODE (GK S1, S2 only)

This specifies how the switches function.

 

F5: RANGE LOW (only when an expression pedal or other controller 

that changes values in a continuous, non-discrete way is set as 
the source)

This sets the minimum for the range in which the value of the 
setting can be changed.

F6: RANGE HIGH (only when an expression pedal or other 

controller that changes values in a continuous, non-discrete way 
is set as the source)

This sets the maximum for the range in which the value of the 
setting can be changed.

 

The parameter switches to the maximum 
value only while the switch is held down, 
and switches to the minimum value when 
the switch is released.

 

The value alternately switches between 
maximum and minimum each time the 
switch is pressed.

 

The value increases.

 

The value decreases.

 

The value is set to the minimum.

 

The value is set to the maximum.

VB-99_e.book 79 ページ ２００８年８月１８日　月曜日　午後１時１０分